Votes - 3, Average rating: 4 ( )

Manafacture: Aquatic File size: 166.77 kb File name: Language of manual:

Please take all measurements directly from the bath. 72" Note: This model requires a remote blower location. The connection for the air blower is under the tub; the blower may be placed up to 15 feet away and connected by piping under the floor. Please refer to the Owner's Manual for detailed installation instructions. Document #1172 on our Fax-on Demand System or on our website at Rough-In Plumbing Measurements Note: This model can be ordered with or without decorative rings. 1 3/4" SPECIFICATIONS: GENERAL SPECIFICATIONS: Tub Size 72" x 36" x 36" 183 cm x 91 cm x 91 cm Bathing Well 52 1/2" long 25" wide 22" interior depth Maximum Water Depth 16 3/4" Shipping Weight 451 lbs. / 205 kg Tub Weight Filled 1181 lbs. / 515 kg Tub Only Weight 185 lbs. / 84 kg Gallons to Overflow 120 gal. / 454 L ELECTRICAL SPECIFICATIONS: Blower/Heater 1 HP; 10.5 AMP; 120V Requirement 15 AMP; 120V, separate circuit required protected w/ Class A GFCI STANDARD EQUIPMENT: Air Bath System: - 1 HP Variable Speed Remote Air Blower with 20-Minute Timer - 600 Watt Air Heating System - Electronic Control Package with Wave and Pulse Features - Automatic Purge and Dry Cycle - Waterproof Remote Control with Infrared Sensor and 25' Cord - Waste and Overflow in Oil Rubbed Bronze Aquatic Quality Features: - Extra Deep and Long Bathing Well UL & IAPMO Listed, Factory Tested Limited Lifetime Warranty OPTIONAL EQUIPMENT: • This model can be ordered with or without decorative rings. Each Serenity 27 bath is handcrafted out of copper. Please note that the hammered copper with a weathered finish will vary from model to model and may gradually change with time due to copper's unique character. Fax-On-Demand Document # 1007 Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water. The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. 800.555.5324 June 20...

Download now

Please, enter two numbers from picture: