Votes - 1, Average rating: 5 ( )

Manafacture: RIDGID File size: 262.9 kb File name: Language of manual:

Securing shelf for transport: 1. To minimize movement during transport, make sure the shelf front is located behind the stop tabs on each side of the box. 2. Once the box is on-site the shelf can be moved forward by slightly lifting the front edges over the stop tabs. The shelf bottom should always lie flat on the runners when finished adjusting the shelf. "RapidPassThru"-1.eps STOP TAB HAND TOOL STORAGE SCREWDRIVER Figure 8 TO INSTALL RAPID PASS™ GROMMET (Model 2048-OS and Model 204830-OS) TOOLS REQUIRED- Hammer and flat blade screwdriver. 1. Locate the “knockout” on the upper right (facing box) corner of the rear box panel. 2. With a screwdriver and hammer, carefully punch out the “knockout” from the inside of the box so that metal ring will fall outside box (figure 9). 3. Place the rubber “Rapid Pass”™ grommet from the inside of the box in the hole and be sure that it is properly seated. BE SURE NO SHARP METAL EDGES ARE EXPOSED (figure 10). 4. When passing cords into the box, be sure to always enter box from the rear. After head of cord is in place, slightly pull back 2-3” to ensure weather resistant “star bursts” are facing toward the outside of box (figure 11). Never push the cord from inside the box so that mating plug points are exposed to the environment 5. BE SURE TO FOLLOW ALL ELECTRICAL SAFETY PRECAUTIONS. SIDE VIEW Figure 9 Figure 11 EXTERIOR VIEW Figure 10 3 FOR REPLACEMENT PARTS, CONTACT RIDGID ON-SITE STORAGE EQUIPMENT AT 1-800-4-RIDGID (1-800-474-3443) MODEL NUMBER DESCRIPTION USE WITH QUANTITY 7357 U-Bolt & Nylon Lock Nut Hardware Kit 2032-OS, 2048-OS, 204830-OS, 3068-OS 4 Pack 7628 Rapid Pass™ Rubber Grommet 2048-OS, 204830-OS 1 Pack • No other replacement parts are available for these models. ACCESSORY CASTERS, CALL 1800-4 RIDGID (1-800-474-3443) LOAD RATING MODEL NUMBER DESCRIPTION USE WITH 4” Caster Set 2032-OS, 2048-OS, 204830-OS, 3068-OS 404-OS 1060 lbs 606-OS 2032-OS, 2048-OS, 204830-OS, 3068-OS 1360 lbs. 6” Caster Set • Casters come as a set of four. • Load ratings are for all four wheels combined. • Load rating includes storage chest weight and contents. CAUTION • Casters are not suitable for keeping the units in place when transporting. • Do not use casters on uneven or rough surfaces. • Do not tow caster mounted boxes. • Failure to comply can cause injury or property damage. LIMITED WARRANTY This LIMITED WARRANTY is made by RIDGID On-Site Storage Equipment, 420 E. Terra. Cotta Ave., Crystal Lake, Illinois to the original retail purchaser of RIDGID® Storage Products. RIDGID STORAGE EQUIPMENT WARRANTS THAT RIDGID ON-SITE STORAGE EQUIPMENT WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF THREE (3) YEARS FROM DATE OF PURCHASE BY THE ORIGINAL RETAIL PURCHASER. THIS WARRANTY IS SPECIFIC TO THIS STORAGE EQUIPMENT. WARRANTIES FOR OTHER RIDGID PRODUCTS MAY VARY. If, before the expiration of the Warranty period, purchaser discovers that this RIDGID On-Site Storage Equipment fails to fulfill the Warranty, pur...

Download now

Please, enter two numbers from picture: