Votes - 3, Average rating: 4.3 ( )

Manafacture: Waterpik Technologies File size: 246.28 kb File name: Language of manual:

Water Pik, Inc. is not responsible for labor charges, installation, or other consequential cost. The responsibility of Water Pik, Inc. shall not exceed the original purchase price of the product. This warranty gives you specific legal rights. You may also have other rights that vary where you reside. Save your receipt as proof of purchase is required for warranty action. Have any questions or need assistance? If in the U.S., call our toll-free Customer Assistance Line, 1-800-525-2774outside the U.S., write us at: Water Pik, Inc. 1730 East Prospect Road Fort Collins, CO 80553-0001 USA Waterpik® (stylized) is a trademark of Water Pik, Inc. registered in the EU, Switzerland, Mexico, Canada, and United States. Waterpik® is a trademark of Water Pik, Inc. registered in Argentina, Australia, Austria, Canada, China, Czech Republic, Hungary, India, Japan, Poland, Russian Federation, South Africa, Switzerland, Ukraine, and the United States. Cascadia® is a trademark of Water Pik, Inc. registered in Australia, Canada, EU, Switzerland and the United States. Optiflow® is a trademark of Water Pik, Inc. registered in Australia, Canada, the EU, Korea and the United States. © 2010 Water Pik, Inc. Water Pik, Inc. 1730 East Prospect Road, Fort Collins, CO 80553-0001 USA FN 20010910-F AD 1. Remove old showerhead. Clean pipe threads thoroughly. 2. Tighten the flexible shower arm onto the “J” pipe by hand, applying force to the nut closest to the “J” pipe. Do not use the flexible shower arm as a handle to tighten this connection. 3. Attach the showerhead to the flexible shower arm by hand tightening the shower arm collar to the threaded end of the shower head. 4. Be sure to properly align threads before tightening. 5. Slowly turn on cold water and check for leaks. If leaks occur, retighten all connections. 6. Do not use excessive force in positioning the showerhead and/or arm. 7. If the showerhead is not maintaining its position, re-tighten the showerhead collar and shower arm nut. Hand-Held Installation 1. Remove old showerhead. Clean pipe threads thoroughly. 2. Slightly loosen swivel collar on bracket. 3. Hand tighten pivot ball to pipe. 4. Hand tighten adaptor to showerhead. 5. Hand tighten hose to adapter and bracket. 6. Place showerhead in bracket. drenching rain showerhead Spray Change Button Shower Arm Nut Collar Models: CF-200 CF-201 CF-201C CF-203C CF-209C CF-261 CF-263C Flexible Arm Spray Change Button Bracket Adapter 5’ hose Instruction Manual Flow Control Waterpik® brand showerheads are equipped with an OptiFLOW® regulator that limits maximum water flow to 2.5 gallons per minute at 80 psi as mandated by U.S. federal law. In areas with extremely low water pressure, causing the shower water flow to be unsatisfactory, the flow regulator may be removed to improve the water flow in the showerhead. To remove, unscrew filter screen by turning counterclockwise. Remove regulator with needle-nose pliers and replace filter screen. ...

Download now

Please, enter two numbers from picture: