Votes - 3, Average rating: 4.3 ( )

Manafacture: Dynasty Spas File size: 405.83 kb File name: Language of manual:

Spa settings will be preserved until next power up. After the circ pump has been running for 2 minutes, the temperature will be displayed. DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool. Once the heater has cooled, reset by pushing any button. If spa does not reset, shut off the power to the spa and call your dealer or service organization. DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool. At 107°F/42°C, the spa should automatically reset. If spa does not reset, shut off the power to the spa and call your dealer or service organization. No action required. The pump and blower will automatically activate regardless of spa status. If the problem persists, contact your dealer or service organization. (May appear temporarily in an overheat situation and disappear when the heater cools.) If the problem persists, contact your dealer or service organization. (May appear temporarily in an overheat situation and disappear when the heater cools.) If the problem persists, contact your dealer or service organization. Check water level in spa. Refill if necessary. If the water level is okay, make sure the pumps have been primed. If problem persists, contact your dealer or service organization. Follow action required for “” message. Heating capability of the spa will not reset automatically; you may press any button to reset. Check water level in spa. Refill if necessary. If water level is okay, make sure the pumps have been primed. Press any button to reset, or this message will automatically reset within 15 minutes. If problem persists, contact your dealer or service organization. Follow action required for “” message. Spa will not automatically reset. Press any button to reset. No message on display. Power has been cut off to the spa. Temperature unknown. “Overheat” - The spa has shut down. One of the sensors has detected 118°F/48°C at the heater. “Overheat” - The spa has shut down. One of the sensors has detected that the spa water is 110°F/43°C. “Ice” - Potential freeze condition detected. Spa is shut down. The sensor that is plugged into the Sensor “A” jack is not working. Spa is shut down. The sensor that is plugged into the Sensor “B” jack is not working. Sensors are out of balance. If alternating with spa temperature, it may just be a temporary condition. If flashing by itself, spa is shut down. A significant difference between temperature sensors has been detected. This could indicate a flow problem. Persistent low flow problems. (Displays on the fifth occurrence of “” message within 24 hours.) Heater is shut down, but other spa functions continue to run normally. Possible inadequate water, poor flow, or air bubbles in detected in the heater. Spa is shut down for 15 minutes. Inadequate water detected in heater. (Displays on third occurrence of “” message.) Spa is shut down. Warning! Shock Hazard! No User Serviceable Parts. Do not attempt service of this control system. Contact your dealer or service organizat...

Download now

Please, enter two numbers from picture: