Votes - 1, Average rating: 3
(
)
)
|
manual abstract
Notice the position of the Concave Washer (G). Insert Pivot Rod (9) into Drain Body (10) and tighten Pivot Nut (F). Thread Locknut (5), Washer (4) and Gasket (3) (Bevel side up) onto Drain Body (10). Apply a bead of Putty (D) to underside of Flange (2). Remove one end of Clip (8) from Pivot Rod (9) by squeezing ends together while sliding. Insert Pivot Rod (9) or (9A) into second or third hole in Extension Rod (7) and reassemble Clip (8). Adjust stopper height by repositioning Extension Rod (7) and tightening Thumbscrew (6). Feed Drain Body (10) up through Sink (A) and thread the Flange (2) or (2A) fully onto Drain Body (10). Tighten Locknut (5) firmly, keeping the pivot rod hole pointed towards the back of the sink. Drop Stopper (1) into Drain Body (10). Position Extension Rod (7) onto Pop-Up Rod (E) and tighten Thumbscrew (6). Push TAILPIECE INSERT (12) into TAILPIECE (11) and push TAILPIECE up and thread tightly into DRAIN BODY (10). 7 M968290A ADJUST HOT LIMIT STOP By restricting HANDLE rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP (5) reduces risk of accidental scalding. To set the maximum hot water temperature of your faucet, all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP (5). 151311975310 5 Remove INDEX BUTTON (1), HANDLE SCREW (2) and pull off HANDLE (3). Replace HANDLE (3), HANDLE SCREW (2) and INDEX BUTTON (1). Turn CARTRIDGE STEM (4) to the OFF position (coldest setting) before making adjustment to HOT LIMIT STOP (5). Use a flat blade screwdriver to pry free the HOT LIMIT SAFETY STOP (5). Pull upward and rotate counterclockwise one number to limit hot water temperature. Use ARROW (6) on CARTRIDGE (7) and NUMBERS (8) on HOT LIMIT STOP (5) for indication. HOTTER (Smaller Numbers) 0 1 3 5 7 9 11 13 15 COLDER (Larger Numbers) 0 1 3 5 7 9 11 13 15 15131197531 15131197531 1 1 2 5 4 5 8 5 7 6 6 4 1 2 3 4 5 6 HOT 4a CHECK DRAIN CONNECTIONS Operate LIFT ROD (4) and fill lavatory with water. Check that DRAIN STOPPER (5) makes a good seal and retains water in lavatory. If necessary adjust stopper height by repositioning LIFT ROD (4) and tightening Thumbscrew (6). Release DRAIN STOPPER (5) and check all drain connections and "P" trap for leaks. Tighten if necessary. COLD 4 TEST INSTALLED FAUCET AND CHECK FOR LEAKS With HANDLE (1) in OFF position, turn on WATER SUPPLIES (2) and check all connections for leaks. Remove AERATOR (3). Operate HANDLE (1) to flush water lines thoroughly. Replace AERATOR (3). "P" TRAP FLAT BLADE SCREWDRIVER 15131197531 3 5 072574-0070A EXTENSION ROD 066116-YYY0A DRAIN STOPPER GASKET WASHER LOCKNUT M961711-0070A TAILPIECE INSERT FLANGE 070847-0070A CLIP 066118-0070A PIVOT ROD 953450-YYY0A COMPLETE DRAIN ASSEMBLY 070532-0040A TAILPIECE 066117-YYY0A FLANGE KIT M962237-0070A INDEX BUTTON A918657-0070A HANDLE SCREW M962236-YYY0A HANDLE 918633-0070A CARTRIDGE SCREWS A923611-0070A HOT LIMIT STOP A954400-0070A CARTRIDGE KIT M962239-YYY0A ESCUTCHEON KIT (SINGLE HOLE) M962238-YYY0A ESCUTCHEON KIT (THREE HOLE) 051049-0070A MOUNTING KIT M968290A Replace the "YYY" with appropriate finish code by C O L L E C T I O N™ T H E CHROME SATIN 002 295 3 066070-YYY0A AERATOR HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1-800 442-1902 Weekdays 8:00 a.m. to 8:00 p.m. EST IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093) Weekdays 8:00 a.m. to 7:00 p.m. EST Product names listed herein are trademarks of American Standard Inc. © American Standard Inc. 2003 2071 2071S MONOBLOCK LAVATORY FAUCET WITH CROSS HANDLE MODEL NUMBER M962242-YYY0A KNOB & ROD M914423-YYY0A METAL RING A912706-0070A O-RING ...
Other models in this manual:Other Home Accessories - 2071 (375.25 kb)