Votes - 3, Average rating: 4.3 ( )

Manafacture: Philips File size: 765.4 kb File name: 0f2aa218-5876-45a3-bae2-a7681582807d.pdf Language of manual:

Remember that you can’t get access to additional functions if these functions were not available on the original remote control of your equipment! To operate menu control. To confirm your selection. SLEEP: to activate and vary the sleep timer (if available on your equipment). To switch on teletext. To stop changing teletext pages. To enlarge the teletext display on screen. To put subtitling on your screen (if available on your equipment), or to switch teletext off. If you use the memory out key (.) to access the next teletext page on your Philips TV, you can use the subtitle key to access. For more details see Memory Out section under Troubleshooting. Fasttext VCR Red Rewind Record Green Stop Play Blue Forward Yellow Pause To switch between the external inputs of your equipment. Instructions for use 3 English You just made a great choice by buying this Philips universal remote control! It takes the place of as many as six separate remote controls and can operate the most-used functions of almost any brand of TV, VCR, satellite tuner/cable decoder and AUDIO equipment. Installing the batteries Your SBC RU 660 needs two 1.5V batteries, type R03, UM4 or AAA. Put them in like this: KEYS & FUNCTIONS Power: to switch TV/VCR/SAT/CD/AUDIO1/AUDIO2 on and off. Mode Selector: to select TV, VCR, Satellite mode, CD, AUDIO1 or AUDIO2. Mute: to switch the TV sound on and off. Channel Up/Down: to select next / previous channel. Volume Up/Down: to control the TV volume. Number Keys: for direct channel selection and other functions. To switch between one and two-digit channel selection and display. To switch to the last selected channel. LR03 / AAA LR03 / AAA Instructions for use English 2 T I P • Remember to replace the batteries at least once a year. • Don’t leave the batteries out for longer than one hour, otherwise you will need to set-up the SBC RU660 again. • While the remote control is actively being moved about, the back-lighting stays on. This consumes more power than normal and may require you to change your batteries more frequently. You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions in the backlighting section. 1 9 + PROG PROG VOL + VOL - TV VCR SAT AUDIO 1 AUDIO 2 CD P P MENU OK AV SHIFT Instructions for use Instructions for use English English 1 SET-UP FOR USE ADVICE Carefully read the complete procedure before starting! TV VCR SAT AUDIO 1 AUDIO 2 CD Your equipment is a Philips brand: 1 Press the mode selector key for the device you want to operate. 2 Press the power key to test. – The green indicator LED under each device (TV, VCR, SAT, CD, AUDIO1, AUDIO2) lights up to confirm the mode you’re in. CHECK Press a few keys to check correct response. Your equipment is of another brand, or your equipment is a Philips brand, but not all keys respond correctly: TV VCR SAT AUDIO 1 AUDIO 2 CD 1 Press the mode selector key to select the device (TV, VCR, SAT, CD, AUDIO1, AUDIO2) you want to operate. 2 Look up the brand name of the device you want to operate in the code list (centre of this manual). Make sure you choose the correct code list for your device! 1 3 3 Make sure the device is switched on. 4 Press and hold keys 1 and 3 simultaneously - for about three seconds- until the green LED lights up. (Release the 9 keys: the green LED should stay on) 5 Enter your 3-digit code using the number keys, within 30 seconds. - – The green LED flashes twice. CHECK That’s it! Press a few keys to check correct response. If response is not correct, repeat procedure beginning at step 1. NOTE -If the LED displays one long flash, the code was not recognised. Please go back to step 1 and repeat the procedure, using the next 3-digit code in the list. -If no key is pressed within 30 seconds, you have to start again at step 1. ADVICE Carefully read the complete procedure before starting! You do not know the brand of your equipment/you can not find the right code in the code list » auto search: TV VCR SAT AUDIO 1 AUDIO 2 CD 1 3 1 Press the mode selector key to select the device (TV, VCR, SAT, CD, AUDIO1, AUDIO2) you want to operate. 2 Make sure the device is switched on (if the device is a VCR, please insert a tape and start playback). 3 Press and hold keys 1 and 3 simultaneously -for about three seconds- until the green LED lights up. (Release the keys: the green LED should stay on) 4 4 Press the power key to start the search. Make sure that you keep the remote control pointed at your equipment. – Each time the green LED flashes, another code is sent. When the right code is found, the equipment switches off. Immediately press the power key to stop the search. If the green LED flashed again after the equipment switched off, this means you missed the correct code! If you missed the code, follow the next proccedure, starting at step 5. If the LED did not flash again after the equipment switched off, go to step 7. 5 Switch the equipment manually back on. 6 Press ‘PROG-’ (down only!) re...

Download now

Please, enter two numbers from picture: