Votes - 3, Average rating: 4.7
(
)
)
|
manual abstract
HALO HEAT . . . a controlled, uniform heat source that gently surrounds foods for better appearance, taste, and longer holding life. Product moisture is retained without adding water. Holding temperature gauge monitors inside air temperature. . Dual wattage control on the one and two drawer 120V cabinets for more precise control of hard-to-hold products. — 500 watts for breads, rolls, biscuits — 1000 watts for meat, potatoes, and vegetables . Extra large pans for additional capacity, or can be adapted to accept standard full-size pans. Canted thermostat knob and indicator light. — Protects controls from damage — User safety feature ON/OFF adjustable thermostat. . Can be built into cabinets or counters. Built-in trim kits are available. Stackable design. Exterior of 20 gauge non-magnetic stainless steel with one set of removable 16 gauge stainless steel drawer rail supports per drawer. Each cabinet is controlled by one (1) ON/OFF adjustable thermostat with a range of 60° to 200°F (16° to 93°C) and includes one (1) holding temperature gauge to monitor inside air temperature. Each drawer includes one (1) 12" x 20" x 6" (305mm x 508mm x 152mm) stainless steel pan. The drawer assembly is easily adapted to accept an oversized pan that is 15" x 20" x 5" (381mm x 508mm x 127mm) for greater capacity. Drawer warmers are designed with four (4) stacking projections, located on the top of each cabinet, to allow stacking in any combination without the need of additional hardware. Individual drawer warmers, or stacked combinations, can be mounted on a 5" (127mm) Caster Stand Assembly for mobility, or a 6" (152mm) Leg Stand Assembly for stationary placement. ¦ MODEL 500-1D: one drawer warmer ¦ MODEL 500-2D: two drawer warmer ¦ MODEL 500-3D: three drawer warmer ELECTRONIC CONTROL OPTION ¦ Solid state electronic control option simplifies temperature setting, has a clear, easy-to-read LED display, and is adjustable in increments of 1 degree. ADDITIONAL FEATURES & OPTIONS PHONE: ® ANSI/NSF 4 Built-in Trim kit Caster Stand Assembly Leg Stand Assembly Drawer Assembly with vents ¦ Specify on order Oversize drawer pan Perforated pan grid (to elevate product from bottom of drawer) W164 N9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A. 262.251.3800 FAX: 262.251.7067 800.329.8744 U.S.A. ONLY WEBSITE: 800.558.8744 U.S.A./CANADA 262.251.1907 INTERNATIONAL DIVISION PRINTED IN U.S.A. DUE TO ONGOING PRODUCT DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. #18 - 08/05 500-1D, 500-2D, 500-3D DRAWER WARMERS 500-1D500-2D500-3D1-11/16" (42mm) CL24-3/8" (618mm) 40-1/16" (1018mm) 22-13/16" (579mm) 11-3/4" (298mm)19" (482mm)26-1/8" (663mm) ELECTRICAL CONNECTIONELECTRICAL CONNECTIONHI-LO Switch available only on 500 -1D and 500 -2D. 6-3/4" (171mm) FOR LEG STAND OR CASTER STAND ASSEMBLY24-5/8" (625mm) HANDLE DIMENSIONS: H x W x D 500-1D EXTERIOR: 11-3/4" x 24-3/8" x 24-5/8" (298mm x 618mm x 625mm) 500-2D EXT...
Other models in this manual:Other Kitchen Appliances - 500-1D (89.22 kb)