Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
(5.6 mm) thick panel is required. This is the same thickness as a standard 1/4 in. plywood or paneling. Raised panel A. Raised panel or decorative trim B. Outer section of panel The outer section of panel must be 7/32 in. (5.6 mm) thick to fit into trim. Design raised panel sections using dimensions shown above. Models with handles Models without handles 23i3/ie" (60.5 cm) (38.1 cm) Panel should be 1/2 to 5/8 in. (13 to 16 mm) thick. NOTE: A thicker panel may need rounded front corners and a cutout for access to the handle. 25" (63.5 cm) (38.1 cm) Panel should be 1/2 in. (13 mm) min. thickness Because Whirlpool Corporation policy Includes a continuous commitment to Improve Dimensions are for planning purposes only. For complete details, see Installation Ref. 9871676 Rev. C our products, we reserve the right to change materials and specifications without notice. Instructions packed with product. Specifications subject to change without notice. 11-16-04...
Other models in this manual:Other Kitchen Appliances - GC900QPK (32 kb)
Other Kitchen Appliances - GC900QPL (32 kb)
Other Kitchen Appliances - GX900QPP (32 kb)
Other Kitchen Appliances - GC900QPP (32 kb)