Login:
Votes - , Average rating: ( )

User manual Alto-Shaam, model 3DN

Manafacture: Alto-Shaam
File size: 1.88 mb
File name:

Language of manual:en

The document is loading, please wait
The document is loading, please wait

manual abstract


Press and hold the on/off key until the LED display turns off (at least three seconds) and on/off indicator goes out. UP/DOWN ARROW KEY The up and down arrow keys are used for a variety of settings when selecting the holding temperature. If an arrow key is pressed and released the display will show the current set temperature for two seconds. If an arrow key is held (at least eight seconds), the value will change at a rapid rate. If the arrow key is pressed and released in rapid succession, the set temperature will change by increments of one degree. ENABLE/DISABLE BEEPER A beeper sounds when an error code is displayed. To choose between beeper on and beeper off mode, the control must be OFF, then press and hold the down arrow key until either "ON" or "OFF" is shown in the LED display. Release arrow key when desired mode is displayed. FAHRENHEIT / CELSIUS °F /°C With the control OFF, to choose between Fahrenheit and Celsius, press and hold the up arrow key until either °F or °C is shown in the LED display. Release key when desired setting is displayed. The control has a four-digit LED display. When the display is ON, it will show current holding temperature, as well as diagnostic information. CONTROL LOCK The warmer controls can be locked so that no changes can be made to the set temperature. To lock the display, press and hold the ON/OFF key and the Up Arrow key at the same time. The lock indicator will illuminate. When the lock indicator is illuminated, additional programming will not be functional other than the key sequence required to unlock the panel. To unlock the display, press and hold the ON/OFF key and the Down Arrow key at the same time. The lock indicator will extinguish. The panel keys will resume normal function. UP/DOWN ARROWS 1. Preheat at 200°F (93°C) for 30 minutes. Press the ON key, and set the temperature to 200°F (93C°) by using the UP/DOWN arrow keys. Allow a minimum of 30 minutes preheating time before loading the drawer warmer with food. The LED heat indicator light will go “OUT” after approximately 30 minutes preheat time, or when the air temperature inside the unit reaches the temperature set by the operator. 2. Load with pans of hot food only. The purpose of the warmer is to maintain hot food at proper serving temperature. Only hot food should be placed into the unit. Before loading with food, use a food thermometer to make certain all products are at an internal temperature range of 140° to 160°F (60° to 71°C). Any food product not within the proper temperature range should be heated before loading into the unit. 3. Reset the control to 160°F (71°C). Check to make certain the drawer is securely closed, and reset to 160°F (71°C) by using the UP/DOWN keys. THIS WILL NOT NECESSARILY BE THE FINAL SETTING. The proper temperature range will depend on the type and quantity of product. When holding food for prolonged periods, it is advisable to periodically check the internal temperature of each item with a food thermometer to assure maintenance of the proper temperature range of 140° to 160°F (60° to 71°C). Drawer Warmer Installation/Operation/Service Manual • 10. OPERATIONGENERALHOLDINGGUIDELINESOPERATIONGENERALHOLDINGGUIDELINES Chefs, cooks and other specialized food service personnel employ varied methods of cooking. Proper holding temperatures for a specific food product must be based on the moisture content of the product, product density, volume, and proper serving temperatures. Safe holding temperatures must also be correlated with palatability in determining the length of holding time for a specific product. Halo Heat maintains the maximum amount of product moisture content without the addition of water, water vapor, or steam. Maintaining maximum natural product moisture preserves the natural flavor of the product and provides a more genuine taste. In addition to product moisture retention, the gentle properties of Halo Heat maintain a consistent temperature throughout the cabinet without the necessity of a heat distribution fan, thereby preventing further moisture loss due to evaporation or dehydration. When product is removed from a high temperature cooking environment for immediate transfer into equipment with the lower temperature required for hot food holding, condensation can form on the outside of the product and on the inside of plastic containers used in self-service applications. Allowing the product to release the initial steam and heat produced by high temperature cooking can alleviate this condition. To preserve the safety and quality of freshly cooked foods however, a maximum of 1 to 2 minutes must be the only time period allowed for the initial heat to be released from the product. Most Halo Heat holding equipment is provided with a thermostat control between 60° and 200°F (16° to 93°C). If the unit is equipped with vents, close the vents for moist holding and open the vents for crisp holding. If the unit is equipped with a thermostat indicating a range of betwee...

Other models in this manual:
Other Kitchen Appliances - 1DN (1.88 mb)
Other Kitchen Appliances - 2DN (1.88 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category