Votes - 3, Average rating: 4.7 ( )

Manafacture: Alto-Shaam File size: 2.45 mb File name: Language of manual:

. . . . . . . . . . . . . . . . . . . . . . .12 HEX NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 The performance of this unit has been optimized using the factory provided bulbs. These bulbs should be replaced with an exact replacement or with a factory recommended replacement. These bulbs have been treated to resist breakage and must be replaced with similarly treated bulbs in order to maintain compliance with NSF standards. DO NOT over-tighten bulbs in their receptacles as this can cause damage to the bulb filament. D A N G E R DISCONNECT UNIT FROM POWER SOURCE BEFORE CLEANING OR SERVICING. C ABLE REP LACEME NT KIT EC2 96 SERIES INCLUDES: CB-3045 CR-3226 IN-3488 BU-3105 BU-3106 SL-3063 TA-3540 ST-2439 NU-2215 CABLE HEATING SERVICE KIT NO. 14228 CABLE HEATING ELEMENT . . . . . . . . . . . . . . . .280 FEET RING CONNECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . .8 INSULATION CORNER . . . . . . . . . . . . . . . . . . . . .1 FOOT SHOULDER BUSHING . . . . . . . . . . . . . . . . . . . . . . . . .8 CUP BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 INSULATING SLEEVE . . . . . . . . . . . . . . . . . . . . . . . . . .8 HIGH TEMPERATURE TAPE . . . . . . . . . . . . . . . . .1 ROLL STUD, 10/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 HEX NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 EC2 & EC2SYS Series Operation & Care Manual • 22 EC2 & EC2SYS Ser ies Operat ion & Care Manual • 23 EC2 & EC2SYS Ser ies Operat ion & Care Manual • 24 EC2 & EC2SYS Ser ies Operat ion & Care Manual • 25 EC2 & EC2SYS Ser ies Operat ion & Care Manual • 26 EC2 & EC2SYS Ser ies Operat ion & Care Manual • 27 EC2 & EC2SYS Ser ies Operat ion & Care Manual • 28 EC2 & EC2SYS Ser ies Operat ion & Care Manual • 29 EC2 & EC2SYS Ser ies Operat ion & Care Manual • 30 EC2 & EC2SYS Ser ies Operat ion & Care Manual • 31 TRANSPORTATION DAMAGE and CLAIMS All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments become the property of the consignee. Should damage occur in shipment, it is a matter between the carrier and the consignee. In such cases, the carrier is assumed to be responsible for the safe delivery of the merchandise, unless negligence can be established on the part of the shipper. 1. Make an immediate inspection while the equipment is still in the truck or immediately after it is moved to the receiving area. Do not wait until after the material is moved to a storage area. 2. Do not sign a delivery receipt or a freight bill until you have made a proper count and inspection of all merchandise received. 3. Note all damage to packages directly on the carrier’s delivery receipt. 4. Make certain the driver signs this receipt. If he refuses to sign, make a notation of this refusal on the receipt. 5. If the driver refuses to allow inspection, write the following on the delivery receipt: Driver refuses to allow inspection of containers for visible damage. 6. Telephone the carrier’s office immediately upon finding damage, and request an inspection. Mail a written confirmation of the time, date, and the person called. 7. Save any packages and packing material for further inspection by the carrier. 8. Promptly file a written claim with the carrier and attach copies of all supporting paperwork. We will continue our policy of assisting our customers in collecting claims which have been properly filed and actively pursued. We cannot, however, file any damage claims for you, assume the responsibility of any claims, or accept deductions in payment for such claims. LIMITED WARRANTY Alto-Shaam, Inc. warrants to the original purchaser only that any original part that is found to be defective in material or workmanship will, at Alto-Shaam's option, subject to provisions hereinafter stated, be replaced with a new or rebuilt part. The parts warranty period is as follows: For the refrigeration compressor on Alto-Shaam Quickchillers™, five (5) years from the date of installation. For the heating element on Halo Heat® cook/hold ovens, as long as the original purchaser owns the oven. For all other parts, one (1) year from the date of installation or fifteen (15) months from the shipping date, whichever occurs first. The labor warranty period is one (1) year from the date of installation or fifteen (15) months from the shipping date, whichever occurs first. Alto-Shaam will bear normal labor charges performed during standard business hours, excluding overtime, holiday rates or any additional fees. To be valid, a warranty claim must be asserted during the applicable warranty period. This warranty is not transferable. THIS WARRANTY DOES NOT APPLY TO: 1. Calibration. 2. Replacement of light bulbs, door gaskets, and/or the replacement of glass due to damage of any kind. 3. Equipment damage caused by accident, shipping, improper installation or alteration. 4. Equipment used under conditions of abuse, misuse, carelessness or...

Download now

Please, enter two numbers from picture: