Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
Questions? Visit us at or call 1-800-777-5452 (U.S.) or 1-877-804-5383 (Canada). Get tips on vacuum packaging and order FoodSaver accessories. Vacuum Channel Antibacterial Drip Tray Rubber Gasket L K J Roll Storage Compartment Sealing StripN M Accessory Port Bag Cutter I HOn/Off Button Extended Vacuum Button G F Accessory Hose Storage (under lid) Manual Seal Button Indicator Lights Seal Control Switch (5-Level) Accessory Hose E D C B A QS.Pro3_GSturbo_v3 6/29/04 11:22 AM Page 2 Getting Started Registering your appliance is quick and easy at How to Make a Bag from a FoodSaver Roll 1. Open appliance lid and place roll into Roll Storage Compartment (M). 2. Pull out enough bag material to hold item to be vacuum packaged, plus 3 inches. Close lid. 3. Turn Seal Control Switch (D) to . 4. Press and release Manual Seal Button (B). Lid will be pulled down automatically and red Indicator Lights (C) will turn on, indicating bag material is being sealed. 5. When red Indicator Lights stop blinking, bag material is sealed. Lid will open slightly. 6. To cut bag, slide Bag Cutter (I) from one end of sliding channel to other end. 7. Open lid, remove bag, and tuck roll back into Roll Storage Compartment before vacuum packaging. Now you are ready to vacuum package with your new bag (see below). 3 Pull Out Bag Material Set Seal Control Switch Press and Release Manual Seal Button 1. Place item(s) in bag, allowing at least 3 inches of space between bag contents and top of bag. 2. Open appliance lid and place open end of bag down into Vacuum Channel (J). Make sure roll material is tucked back into Roll Storage Compartment (M) or it could prevent the appli- ance from operating properly. 3. Close lid. 4. Set Seal Control Switch (D) to: or to re-seal non-FoodSaver bags, such as Mylar® potato chip bags (shorter seal time). to vacuum package using FoodSaver bags (medium seal time). or to vacuum package moist or juicy foods such as raw meat (longer seal time). 5. To begin vacuum process, press and release On/Off Button (F). Motor will start and Indicator Lights (C) will turn on in sequence. 6. When motor and Indicator Lights turn off, vacuum process is complete. Open lid and remove bag. Refrigerate or freeze as needed. (See FoodSaver Reference Guide for food safety tips.) Tip: The On/Off Button can also be used to cancel vacuum process mid-way and open lid. Note: This appliance features a heavy-duty Sealing Strip (N) that can perform 50 consecutive seals without overheating. 54 3 21 How to Vacuum Package with FoodSaver Bags Place Bag in Vacuum Channel Set Seal Control Switch Press and Release On/Off Button g QS.Pro3_GSturbo_v3 6/29/04 11:22 AM Page 3 FoodSaver Accessories Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers. FoodSaver Accessory Guidelines 1. Always leave at least one inch of space between 4. For accessories with a large knob on lid, turn knob contents and rim. to Vacuum. Vacuum package using instructions 2. Wipe rim of canister, container or bottle to below. When vacuum process is complete, turn ensure it is clean and dry. knob to Closed before removing Accessory Hose. 3. Place lid on canister or container, or place stopper 5. For accessories without a large knob on lid, in bottle. vacuum package using instructions below. How to Vacuum Package with FoodSaver Accessories Accessories When motor and Indicator Lights turn off, Gently twist and remove Accessory Hose from To test vacuum, simply tug on accessory lid. How to Open FoodSaver Accessories after Vacuum Packaging For use with Ball® and Kerr® brand Mason jars. FoodSaver Bulk Canisters and Quick Marinators between Mason jar lid and highest part of threaded (with large knob on lid) and Universal Lids rim. Twist spoon gently to release vacuum. To release vacuum and open, turn knob on lid FoodSaver Bottle Stoppers to Open. To release vacuum and open, simply twist and pull Insert Accessory HosePress and Release On/Off Button 1. Prepare container according to FoodSaver 4. Accessory Guidelines above. vacuum process is complete. 2. Insert one end of Accessory Hose (E) into 5. Accessory Port (H) on appliance. Insert other accessory and appliance. end into port on accessory. Twist gray tab while 6. inserting hose to ensure a tight fit. It should not move. 3. To begin vacuum process, press and release Note: For important tips on using accessories On/Off Button (F). Motor will start and Indicator with different foods, please refer to the FoodSaver Lights (C) will turn on in sequence. Reference Guide. FoodSaver Vacuum Packaging Canisters FoodSaver Jar Sealer with Mason Jars (without large knob on lid) To release vacuum and open, push gray rubber IMPORTANT: Do NOT use screw bands when button on lid. vacuum packaging jars. To open, wedge spoon up on Bottle Stopper. QS.Pro3_GSturbo_v3 6/29/04 11:22 AM Page 4 Additional Features Accessory Hose Storage (under lid) To keep your Accessory Hose (E) ...
Other models in this manual:Other Kitchen Appliances - Professional III (296.2 kb)