Login:
Votes - 3, Average rating: 3.7 ( )

User manual APW Wyott, model BW-30

Manafacture: APW Wyott
File size: 312.05 kb
File name: ade908a9-4815-4650-a654-bba74f9fa163.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Call 1 (800)733-2203. SPECIFICATIONS ELECTRICAL BW-20 120 Volt, 60 Hz, 1 Phase, 4.2 Amp BW-20 220 Volt, 50/60 Hz, 1 Phase, 2.3 Amp BW-30 120 Volt, 60 Hz, 1 Phase, 3.3 Amp BW-30 220 Volt, 50/60 Hz, 1 Phase, 1.8 Amp BW-30 230 Volt, 50 Hz, 1 Phase, 1.8 Amp, 400 Watts, CE BW-50 120 Volt, 60 Hz, 1 Phase, 5.0 Amp BW-50 220 Volt, 50/60 Hz, 1 Phase, 2.8 Amp BW-50 230 Volt, 50 Hz, 1 Phase, 2.7 Amps, 600 Watts, CE DIMENSIONS BW-20 17-3/4” (450.9mm) x 22-1/8” (562.0mm) x 10-5/8” (269.9mm) BW-30 22-3/4” (577.9mm) x 22-1/8” (562.0mm) x 10-5/8” (269.9mm) BW-50 34-3/4” (882.7mm) x 22-1/8” (562.0mm) x 10-5/8” (269.9mm) ELECTRICAL CONNECTIONS Check the data plate to determine for which voltage this unit is wired and what voltage service is to use. A WARNING: Checkthe data plate on this unit before installation. Connectthe unit only to the voltage and frequency listed on the data plate. Connect only to 1 or 3 phase as listed on the data plate. 120 Volt Plug © 230 Volt Plug 230 Volt, 50Hz, CE Plug Ü © A WARNING: Impropergrounding could result in electrical shock. This appliance is equipped with a three-prong (grounded plug) for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong fromthis plug. 4 EQUIPMENT PREPARATION Clean the unit before using. Wipe body and the inside of the unit with a hot, wet cloth to remove any shipping dust or protective oil. OPERATING INSTRUCTIONS 1. If moist heat is desired, raise the bun support and place a damp towel or 4-8 ounces (118 ml - 236 ml) of water into the drawer pan. 2. Turn the thermostat to the desired setting: the “HEATING” lamp will then light. 3. When the desired temperature is reached, the “HEATING” lamp will go off, and the unitwill maintain the selected temperature automatically. NOTE:Thebunwarmeroperatesinaheatrangeof60°Fto250°F (15.5°C to 121.1°C). 4. The unit is now ready to use. A WARNING: This unit is not intended to hold potentially hazardous foods such as un-cooked or unpreserved meats and sausages. MAINTENANCE A WARNING: Never clean any electrical unit by immersing it in water. Turn off before cleaning A surface. Once a week or more often if necessary clean the unit thoroughly. T urn off the unit and allow it to warm. STAINLESS STEEL: To remove normal dirt or product residue from stainless steel, use ordinary soap and water (with or without detergent) applied with a sponge or cloth. Dry thoroughly with a clean cloth. Never use vinegar or corrosive cleaner. Do not use chorine based cleaners. To remove grease and food splatter or condensed vapors that have baked on the equipment, apply cleaners to a damp cloth or sponge and rub cleanseron the metal in the direction of the polished lines on the metal. Rubbing cleanser as gently as possible in the direction of the polished lines will not mar the finish of the stainless steel. NEVER RUB WITH A CIRCULAR MOTION. Soil and burnt deposits which do not respond to the above procedure can usually be removed by rubbing the surface with SCOTCH-BRITE scouring pads or STAIN LESS scouring pads. A CAUTION: Do not use ordinary steel wool as any particles left on the surface will rust. A NEVER USE a wire brush, steel or abrasive scouring pads (except stainless), scraper, file or other steel tools. Surfaces which are marred collect dirt more rapidly and become more difficult to clean. Marring also increases the possibility ofcorrosive attack. NEVER use any corrosive cleaner. Use only cleaners approved for stainless steel. NEVER use cleaning solvents with a hydrocarbon base. A WARNING: SHOCK HAZARD - De-energize all power to equipment before cleaning the equipment. 5 PARTS LIST & EXPLODED VIEW ITEM DESCRIPTION BW-20 BW-30 BW-50 1 Pan Cover 217427-20 217427-30 217427-50 2 Bun Support 6134-01 217435-30 217435-50 3 Pan 24195-00 24214-00 24213-00 4 Screw, Tubular 83002-00 Same Same 5 Inner Drawer 217422-20 217422-30 217422-50 6 Drawer Insulation 217432-20 217432-30 217432-50 7 Drawer Spacer 217423-00 Same Same 8 Flat Washer 85072-00 Same Same 9 Drawer Pull, S/S 87049-00 Same Same 10 Drawer Front 217421-20 217421-30 217421-50 11 Drawer Frame Weldment 217433-20 217433-30 217433-50 12 Slide Bearing, S/S 86415-00 Same Same 13 Lock Washer 85081-00 Same Same 14 Nut, Hex, 1/4-20 84317-00 Same Same 15 Stop 86635-04 Same Same 16 Nut, Lock, #8-32 84088-00 Same Same 17 Screw, #8-32 x 3/8 81349-00 Same Same 18 Cover, Heater 217424-20 217424-30 217424-50 19 Kit, Insulation 217430-19 217430-29 217430-49 20 Light, Indicator 120V 15151-00 Same Same 21 Light, Indicator 250V 15153-00 Same Same 22 Base 217426-20 217426-30 217426-50 23 Element, Heating 120V 14316-20 14316-30 14316-50 24 Element, Heating 220/230V 14317-20 14317-30 14317-50 25 Thermostat 13011-00 Same Same 26 Screw, #10-32x5/16 81683-00 Same Same 27 Foot, Adjustable 86621-00 Same Same 28 Screw, #6-32 x 1/4 81030-00...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category