Votes - 4, Average rating: 3
(
)
)
|
manual abstract
. Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the copier. . Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Getting started SAFETY PRECAUTIONS This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that the copier does not produce hazardous laser radiation. For your safety, observe the precautions below. . Do not remove the cabinet, operation panel or any other covers. . The copier’s exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots. MAIN FEATURES High-speed laser copying . Since warm-up time is zero, copying can be started immediately after the power switch is turned on. . First-copy time is only 9.6 seconds (normal mode). . Copying speed is 15 copies/min., which adapts to business use, allowing improvement of working efficiency. High-quality digital image . High-quality image copying at 600 dpi can be performed. . In addition to the automatic exposure mode, the manual exposure can be adjusted in five steps. . The photo mode copying function allows clear copying of delicate halftone original images such as monochrome photos and color photos. 4 Substantial copying functions . Zoom copying from 50% to 200% in 1% increments can be performed. . Continuous copying of maximum 99 sheets can also be performed. . Automatic document feeding through the reversing single pass feeder (RSPF) can be performed. . Toner save mode reduces toner consumption by approximately 10%. . User programs allow setting/modification of functions for customer’s needs. . Automatic two-sided copying can be performed. Scan once/ Print many . This copier is equipped with a 1-page memory buffer. This memory allows the copier to scan an original 1 time only and make up to 99 copies. This feature allows for improved workflow, reduced operating noise from the copier and reduced wear and tear on the scanning mechanism. This feature provides for a higher reliability. Printer feature . This copier can be used as a laser printer. Environmentally friendly design . Paper output tray is housed in the copier for space saving. . Preheat mode and auto power shut-off mode are provided to reduce power consumption in standby mode. Getting 5 6 1 Getting started PART NAMES RSPF exit area Original guides Feeding roller cover Document feeder tray Transfer charger TD cartridge lock release button TD cartridge Drum cartridge Drum cartridge handle Fusing unit release lever Charger cleaner Original table Operation panel Paper tray Front cover Side cover open button Original cover Side cover Power cord socket Power switch Handle Handle Bypass tray guides Bypass tray Paper output tray Paper output tray extension Parallel interface connector OPERATION PANE L 1 Getting ZOOM 51/2 MAX. 81/2x 51/2 81/2x 81/211x81/211x81/214x81/2 MIN. 11x50% 64% 78% 100% 129% 200% Original to copy key and indicators : Two-sided copies from one- sided originals. Turn on Long Edge or Turn on Short Edge can be selected. : Two-sided copies from two- sided originals. (Can be selected only when the RSPF is used.) : Single-sided copies from two- sided originals. (Can be selected only when the RSPF is used.) Exposure mode selector key and indicators Use to sequentially select the exposure modes: AUTO, MANUAL or PHOTO. Selected mode is shown by a lit indicator. (p. 22) Light and dark keys and exposure indicators Use to adjust the MANUAL or PHOTO exposure level. Selected exposure level is shown by a lit indicator. (p. 22) Use to start and terminate user program setting. (p. 27) Alarm indicators : Drum replacement required indicator (p. 30) : Misfeed indicator (p. 35) : TD cartridge replacement required indicator (p. 29) RSPF indicator (p.19) RSPF misfeed indicator (p.35) Copy ratio selector key and copy ratio indicators Use to sequentially select preset reduction/ enlargement copy ratios. Selected copy ratio is shown by a lit indicator. (p. 23) Zoom indicator (p. 23) Copy ratio display (%) key (p. 23) Display Displays the specified copy quantity, zoom copy ratio, user program code, and error code. ON LINE indicator Lights up when the machine is used as a printer. For description of the ON LINE indicator, see the printer operation manual. Power save indicator Lights up when the copier is in a power save mode. (p. 26, 27) Tray select key Use to select a paper feed station (paper tray or bypass tray). (p. 24) Paper feed location indicators Light up to show the selected paper feed station. Zoom keys Use to select any reduction or enlargement copy ratio from 50% to 200% in 1% increments. (p. 23) Copy quantity keys . Use to select the desired copy quantity (1 to 99). (p. 18) . Use to make user program entries. (p. 27) Clear key . Press to clear the display, or press during a...