Votes - 4, Average rating: 3.8
(
)
)
|
Photos and specs Sony DPP-FP95 |
manual abstract
• If a memory card is inserted in the printer, the printer cannot read the signal from an external device connected to the PictBridge/EXT INTERFACE connector of the printer. Remove the memory card, if any. 1 Set your digital camera or other external device ready for printing with the Mass Storage-compliant printer. The settings and operations that are necessary before connection differ depending on the external device you use. For details, see the operating instructions of the external device. (In case of Sony Cyber-shot digital camera, for example, select “Normal” mode or “Mass Storage” mode for the “USB Connect.” ) 2 Connect the printer to the AC power source (page 12). 3 Press the 1 (on/standby) button to turn on the printer. 4 Connect an external device such as a USB memory to the PictBridge/ EXT INTERFACE connector of the printer. Use a USB cable supplied with your digital camera or external device. You can enjoy direct printing. To PictBridge/EXT INTERFACE connector External device such as a USB memory Notes • If you use a commercially available USB cable, please use the A-TYPE USB cable of shorter than 3m in length. • While the access indicator of the external device is flashing, never turn off the power of the printer or an external device nor remove the external device. The data inside the external device may be damaged. We cannot compensate for any damages that may be caused by data loss or damage. • You cannot use a USB hub or a USB device equipped with a USB hub. • Encoded or compressed data by fingerprint authentication or password cannot be used. 46 GB Printing from a PictBridge digital camera Printing from a PictBridge digital camera Printing from a PictBridge digital camera You can connect a PictBridge-compliant digital camera and print an image directly from your digital camera. When printing from a PictBridge/EXT INTERFACE connector, make sure to remove memory card(s), your computer, and a television from the printer in advance. 1 Set your digital camera ready for printing with a PictBridge-compliant printer. The required settings and operations that must be completed before connection differ depending on the digital camera. For details, see the operating instructions of your digital camera. (In case of a Sony Cyber-shot digital camera, for example, select “PictBridge” mode for the “USB Connect.”) 2 Connect the printer to the AC power source (page 12). 3 Press the 1 (on/standby) button to turn on the printer. 4 Connect the PictBridge-compliant digital camera to the PictBridge/EXT INTERFACE connector of the printer. When you connect a PictBridge-compliant digital camera to the printer, “PictBridge” is displayed on the LCD display of the printer. 5 Operate the digital camera to print an image. The printer supports the following prints: • Single-image print • All images print •Index Print • DPOF Print • Borders/Borderless Print • Date Print To PictBridge/EXT INTERFACE connector Notes • If you replace an ink ribbon while the printer is connected to a PictBridge-compliant digital camera, an image may not be printed properly. If this occurs, disconnect and then connect the digital camera. • When printing from a PictBridge-compliant digital camera, an image will be printed according to the settings of the Print setup menu of the printer. When you set the Date Print or Borders/Borderless options with your digital camera, the digital camera settings will have priority. If you select “Borders” with the printer and “Borders” with your camera, “Pattern 1” will be used for printing. • Even when you select “Date/Time” for Date Print setting, time may not be printed according to the digital camera you use. • For error messages displayed on your digital camera, refer to the operating instructions of your digital camera. • You cannot use a USB hub or a digital camera containing a USB hub. Camera or other PictBridge-complaint device To USB connector Printing from a PictBridge digital camera 47 GB Printing from a Bluetooth-compliant device Printing from a Bluetooth-compliant device Printing from a Bluetoothcompliant device By connecting the Sony DPPA-BT1 Bluetooth USB adaptor to the PictBridge/EXT INTERFACE connector of your printer, you can print an image from a Bluetooth-compliant mobile phone, digital camera, or other device. Notes • Do not use the DPPA-BT1 outside the area you purchased it. Depending on the area, the use of the adaptor may violate the local radio wave regulations and may be subject to penalty. • In some regions, the Sony DPPA-BT1 Bluetooth USB adaptor is not sold. Compatible profiles for Bluetooth communication The DPP-FP85/FP95 supports the following profiles: • BIP (Basic Imaging Profile) • OPP (Object Push Profile) For the profiles that your Bluetooth device supports, please refer to its manual. What is a “Profile”? A profile consists of the standards that enable Bluetooth wireless communication. There are several profiles available, depending on the purposes and product to be used. T...
Other models in this manual:Printers - DPP-FP85 (3.84 mb)