Votes - 3, Average rating: 3.3 ( )

Manafacture: Samsung File size: 8.09 mb File name: Language of manual:

7 (Menu) Opens Menu mode and scrolls through the available menus. 8 Left/Right Arrows Scrolls through the options available in the selected menu and increases or decreases values. 9 OK Confirms the selection on the screen. 10 (Back) Sends you back to the upper menu level. 11 (Start) Starts a job. 12 (Stop/Clear) Stops an operations at any time. 13 Status LED Indicates the status of your machine (see "Understanding the status LED" on page 96). Adjusting the control panel 1. Introduction 26 Turning on the machine Connect the machine to the electricity supply first. Turn the switch on if the machine has a power switch. 1. Introduction 27 Installing the driver locally A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine’s driver (see Advanced Guide). • If you are a Macintosh, Linux, or Unix OS user, refer to the Advanced guide. • The installation window in this User’s Guide may differ depending on the machine and interface in use. • Selecting Custom Installation allows you to choose which programs to install. • Only use a USB cable no longer than 3 meters (118 inches). Windows Make sure that the machine is connected to your computer and powered on. If the “Found New Hardware Wizard” appears during the installation procedure, click Cancel to close the window. Insert the supplied software CD into your CD-ROM drive. 2 Click Start > All programs > Accessories > Run. X:\Setup.exe replacing “X” with the letter, which represents your CD ROM drive and click OK. Select Install Now. 3 (SCX-470x Series does not support the Wireless Setting and Installation menu) Read the License Agreement, and select I accept the terms of the 4 License Agreement. Then, click Next. Follow the instructions in the installation window. 5 1. Introduction 28 Reinstalling the driver If the printer driver does not work properly, follow the steps below to reinstall the driver. Windows Make sure that the machine is connected to your computer and powered on. 1 From the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Uninstall. 2 Follow the instructions in the installation window. 3 Insert the software CD into your CD-ROM drive and install the driver again (see "Installing the driver locally" on page 28). 4 1. Introduction 29 2. Menu overview and basic setup This chapter provides information about the overall menu structure and the basic setup options. • 2. Menu overview and basic setup This chapter provides information about the overall menu structure and the basic setup options. • Menu overview 31 • Changing the display language 40 • Media and tray 41 • Basic printing 55 • Basic copying 61 • Basic scanning 65 • Basic faxing 66 Menu overview The control panel provides access to various menus to set up the mac...

Download now

Please, enter two numbers from picture: