Votes - 3, Average rating: 3
(
)
)
|
manual abstract
Then connect the cable to the printer's parallel port with the wire clips. 1 Unpack the Printer 1 Remove all items from the box. 2 2 Connect the Printer to the Computer 3 Connect the AC Adapter 1 2 3 Make sure your computer is turned off. The printer driver CD-ROM includes: Microsoft® Windows® printer driver Macintosh® printer driver IS-12 Color Scanner Cartridge driver Online User's Manual Software applications Electronic registration Remove all shipping tape and materials from the unit. Tape may not be in the exact locations shown here. You will need to purchase a parallel cable for Windows 95/98, Windows NT®, or Windows CE (must be IEEE 1284-compliant), or a USB cable for Windows 98 or Mac® OS. AC Adapter BC-11e Color BJ Cartridge BC-10 Black BJ Cartridge BCI-11 Color Ink Tank (for future use) BCI-11 Black Ink Tank (for future use) SB-10 Ink Cartridge Storage Box BJC-85 Printer Documentation Package Tape Top Cover Protective Sheet Lift the top cover and remove the protective sheet. You can connect the printer to the computer in one of three ways: USB Cable Parallel Cable Wireless IrDA The interface you use depends on your computer. Connect the cable to the computer, and then to the printer. Connect the cable to the computer, and then to the printer. Macintosh Connection USB Cable USB Cable Wireless IrDA Users If you have a computer with an infrared port for wireless data transmission, you can set up a cordless connection with the BJC-85. In order to use the infrared port, make sure your computer meets the following requirements: Computer–PC (not compatible with Macintosh) Operating System–Windows 98, CE 2.1 Infrared Transmission Device–Built-in IrDA port or IrDA transmission adapter on the PC; IrDA version 1.1 or later Drivers–BJC-85 printer driver and Microsoft infrared driver version 3.0. NOTE: Microsoft IrDA driver is not included on the CD-ROM. The distance between the PC and BJC-85 infrared ports should not exceed 3 feet for data transmission. For more detailed information on wireless printing, see your online User's Manual after installing the printer driver from the CD-ROM. Parallel Interface Cable— IEEE 1284-compliant Wire Clips Screws Important! The socket-outlet shall be installed near the equipment and shall be easily accessible. Insert the power cord into the AC Adapter. Plug the DC plug into the back of the printer. Plug the power cord into the power outlet. Power Cord AC Adapter DC Plug Power Cord Plug USB Port USB Port Install the Canon BJ® Cartridge 4 Remove the BC-11e Color BJ Cartridge from its package. 1 2 3 4 5 6 7 Load Paper 1 3 2 5 Lift the top cover. Press the POWER button to turn on the printer. Align the triangular marks on the BJ cartridge and the cartridge holder; set the cartridge in the holder at a slight angle. Gently press down on the raised left side of the BJ cartridge until it locks into place. Open the cartridge cover, and press the CARTRIDGE button to move the cartridge holder to the center of the printer. Close the cartridge cover and press the CARTRIDGE button. The BJ cartridge and holder move to the home position on the right side of the printer. Remove these protective materials: Orange cap Orange tape Move the paper guide to the left. Adjust the paper guide to the left edge of the stack. Printing side face up Align sheets here Paper Guide Paper Guide With the side you want to print on facing up, insert the paper into the printer until it stops. Remove Cap Remove Tape Do Not Touch these areas Cartridge Holder Top Cover Cartridge Cover 6 Install the Printer Driver The printer driver controls communication between the printer and your computer. Use the printer driver CD-ROM and follow these simple steps and the instructions on the screen. Windows 98—USB Cable Users 1. Turn on the computer. The Add New Hardware screen appears: 2. Insert the printer driver CD-ROM into your CD-ROM drive and click Next. The next screen asks what you want Windows to do: 3. Choose "Search for the best driver for your device," and click Next. The next screen asks you where to look for the driver: 4. As shown above, click the "CD-ROM drive" check box; be sure to uncheck the other options. Click Next. 5. Once the driver is found, this screen appears: 6. Click Next. The next screen shows the successful completion of this installation. USB is now enabled on your computer. 7. To proceed on to the printer driver installation, click Finish. 8. Eject the CD-ROM and re-insert it. Setup starts automatically. If Setup does not start automatically, click Start on the Windows taskbar and then click Run. Type X:\SETUP (where X:is your CD-ROM drive). Then click OK. 9. Follow the on-screen instructions. Setup includes: Printer driver installation Product registration Creative software installation Installation Tips If you do not see this screen, eject the CD-ROM and re-insert it. Then follow the instructions on the screen. Windows 95/98/NT—Parallel Cable Users 1. Turn on the computer. If you see any type o...