Votes - 3, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
Do not attempt to insert a non-supported memory card into the printer. Do not attempt to insert a memory card that has dust or dirt on its surface. This may cause problems. Insert the card according to the following instructions. CompactFlash Type I & II The label and the arrow should be facing up. Insert the memory card until it stops. xD-Picture Card M Type is not supported. The label should be facing up with the arrow pointing into the printer and the metal contacts facing down. Insert the memory card until it stops. MultiMedia Card The angled corner should be on the right, the label facing up and the arrow pointing into the printer. Insert the memory card until it stops. Memory Stick/Memory Stick-PRO The angled corner should be on the left, the arrow pointing into the printer and the metal contacts facing down. Insert the memory card until it stops. Secure Digital The label should be facing up and the angled corner should be on the right with the metal contacts facing down. Insert the memory card until it stops. SmartMedia The angled corner should be on the right and the arrow pointing into the printer with the metal contacts facing up. Insert the memory card until it stops. 3.2 Printing images If you can see images on the display panel, select one and print it. Insert one memory card only. When a paper jam occurs during printing, do not pull out the jammed paper. After turning the power off and then on again, the jammed paper should come out automatically. If you remove the memory card while printing a job, the printing job will be canceled. 1 Insert the memory card. For details about inserting memory cards, see page 3.2-Inserting memory cards. 2 Press the Left and Right buttons to select an image from those on the display panel. The image number displays in the bottom right corner. Images in file formats not supported by the printer are not displayed and cannot be printed. 3 Press the Up and Down buttons to select the number of copies to print. If you want to print a single copy, just press the Print button. The number of copies you have selected displays in the upper left corner. To apply various effects, see page 3.9Setting various effects. To select additional printing or printer functions, see page 3.10Setting additional functions. 4 Press the Print button and press it again to start printing. After printing, the number of copies to print reverts to ‘0.’ x3 : 4 9/9 Image Number Copies x3 : 4 9/9 x3 : 4 Print Cancel When you press the Cancel button to cancel a printing job or if a paper jam occurs, one page of the ribbon cartridge’s life is used, even if an image is not completely printed. 3.3 Printing multiple images You can select a group of images and a number of copies to be printed of each, rather than separately selecting the number of copies for each photo. Insert one memory card only. When a paper jam occurs during printing, do not pull out the jammed paper. After turning the power off and then on again, the jammed paper should come out automatically. If you remove the memory card while printing a job, the printing job will be canceled. 1 Insert the memory card. For details about inserting the memory cards, see page 3.2-Inserting memory cards. 2 Press the Left and Right buttons to select an image from those on the display panel. The image number displays in the bottom right corner. Images in file formats not supported by the printer are not displayed and cannot be printed. 3 Press the Up and Down buttons to Copies select the number of copies. The number of copies you have selected displays in the upper left corner. To apply various effects, see page 3.9Setting various effects. To select additional printing or printer functions, see page 3.10Setting additional functions. Image Number x3 : 4 9/9 x3 : 4 9/9 3.4 Printing multiple images 4 Press the Left and Right buttons to Copies Total copies select the previous or next image. Follow the step 3. The total copies of the selected image displays in the upper right corner. x3 : 4 9/9 5 Press the Print button and press it again to start printing. After printing, the number of copies to print reverts to ‘0’ . x3 : 4 Print Cancel 3.5 Printing images using multi- display You can select and print multiple images from the display panel. Insert one memory card only. 1 Insert the memory card. For details about inserting memory cards, see page 3.2-Inserting memory cards. 2 Press the Zoom Out button to display four images on the display panel. Press the Zoom Out button again to display nine images on the display panel. Press the Zoom In button to return to the four-image display. 3 Press the Left and Right buttons to move to an image on the display panel and then press the OK button to select the image. The check mark on the bottom left means the number of copies has already been selected. Press the Right button at the bottom right corner image to move to the next nine image. 4 The selected image displays. You can now start printing. For details about print...
Other models in this manual:Printers - SPP-2020 (4.63 mb)
Printers - SPP-2020A (4.63 mb)
Printers - SPP-2020B (4.63 mb)
Printers - SPP-2020R (4.63 mb)