Votes - 3, Average rating: 3.3
(
)
)
|
manual abstract
Using a network-connected machine 14 The wireless network connects according to the network configuration. Items to prepare Wireless network setup 512. Using a network-connected machine 14 The wireless network connects according to the network configuration. Items to prepare 15 15 When the wireless network setting is completed, disconnect the USB cable between the computer and machine. 16 16 Follow the instructions on the screen to complete the installation. After the installation is finished, click Quit or Restart. ....Using a network cable Your machine is a network compatible machine. To enable your machine to work with your network, you will need to perform some configuration procedures. • After completing the wireless network connection, you need to install a machine driver to print from an application (See "Installing driver over the network" on page 17). • See your network administrator, or the person that set up your wireless network, for information about your network configuration. •Access point • Network-connected computer • Software CD that was provided with your machine • The machine installed with a wireless network interface •Network cable Printing a network configuration report You can identify the network settings of your machine by printing a network configuration report. See "Printing a network configuration report" on page 13. IP setting using SetIP Program (Windows) This program is used to manually set the network IP address of your machine using its MAC address to communicate with the machine. The MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. See "Setting IP address" on page 13. Wireless network setup Configuring the machine’s wireless network Before starting you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network. To configure wireless parameters, you can use SyncThru™ Web Service. Using SyncThru™ Web Service Before starting wireless parameter configuration, check the cable connection status. 1 1 Check whether or not the network cable is connected to the machine. If not, connect the machine with a standard network cable. 2 2 Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window. For example, 2. Using a network-connected machine 3 3 Click Login on the upper right of the SyncThru™ Web Service 4 4 website. Type in the ID and Password then click Login. • ID: admin 5 5 • Password: sec00000 When the SyncThru™ Web Service window opens, click 6 6 Network Settings. Click Wireless > Wizard. Wizard will help you setup the wireless network configuration. However, if you want to set the wireless network directly, select Custom. Wireless network setup 532. Using a network-connected machine 7 Select the one Network Name(SSID) in the list. 532. Using a network-connected machine 7 Select the one Network Name(SSID) in the list. • SSID: SSID (Service Set Identifier) is a name that identifies a wireless network, access points, and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case-sensitive. • Operation Mode: Operation Mode refers to the type of wireless connections (See "Wireless network name and network key" on page 30). -Ad-hoc: Allows wireless devices to communicate directly with each other in a peer-to-peer environment. - Infrastructure: Allows wireless devices to communicate with each other through an access point. If your network’s Operation Mode is Infrastructure, select the SSID of the access point. If the Operation Mode is Ad- hoc, select the machine’s SSID. Note that “portthru” is the default SSID of your machine. 8 8 Click Next. If the wireless security setting window appears, enter the registered password (network key) and click Next. 9 9 The confirmation window appears, please check your wireless setup. If the setup is right, click Apply. Disconnect the network cable (standard or network). Your machine should then start communicating wirelessly with the network. In case of Ad-hoc mode, you can use a wireless LAN and wired LAN simultaneously. ....Turning the Wi-Fi network on/off You can also turn on/off the Wi-Fi from the machine’s control panel using the Network menu. 1 1 Check whether the network cable is connected to the machine. If not, connect the machine with a standard network cable. 2 2 Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window. For example, Wireless network setup 542. Using a network-connected machine 3 Click Login on the upper right of the SyncThru™ Web Service website. • The machine does not support a wireless network. Check the machine's user's guide included on...
Other models in this manual:Printers - ML-2950D (10.94 mb)
Printers - ML-2950DR (10.94 mb)
Printers - ML-2950ND (10.94 mb)
Printers - ML-2950ND/GOV (10.94 mb)