Votes - 1, Average rating: 3 ( )

Manafacture: Samsung File size: 20.68 mb File name: Language of manual:

Other manuals for this model:

Printers - CLX-9201ND (20.07 mb)

Printers - CLX-9201ND (834.04 kb)

Printers - CLX-9201ND (20.23 mb)

Printers - CLX-9201ND (887.03 kb)

2.Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 38). 3.Adjust the settings for each copy such as Paper Source, Duplex and more in the Basic tab (see "Changing the settings for each copy" on page 52). 4.Press Advanced tab > Original Size from the display screen. 5.Select the original size. You can change the paper list on the display screen pressing Inch Size or mm Size. The paper list is divided into the available A/B size type and letter size type paper in this machine. If there is no required paper size or you need to use custom sized paper, press the cardinal point arrows to set the original size. You can also set and save the custom size using Custom Size. You can then select the custom size whenever you need it. The custom size available is different depending on where the originals are placed. Automatically detects the size of originals, but this option is supported only when originals are A3, A4 LEF, A4 SEF, B4, B5 LEF, B5 SEF, A5 LEF, A5 SEF, Ledger, Legal, Letter LEF, Letter SEF, Statement LEF and Statement SEF-sized. If you use non-standard-sized paper, image loss could occur. In this case, you need to select the appropriate paper size before you print. Allows the use of both of Letter and Legal-sized papers together, and the machine uses the proper-sized paper from several trays. For example, if the originals total 3 pages, the 1st page is letter-sized paper, the 2nd page is legal-sized paper, and the 3rd page is letter-sized paper, then the machine prints the output first letter, legal, and letter in order from several trays. Mixed Size is activated when the originals are placed in the DADF. You can select the size of originals directly by pressing the buttons. 6.Press OK from the display screen. 7.Press Start on the control panel to begin copying. Selecting the orientation of originals 1.Press Copy from the display screen. 2.Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 38). 3.Press Advanced tab > Original Orientation from the display screen. 4.Select the orientation of the original document. Select this setting for an original document loaded with the top toward the back of the machine. Select this setting for an original document loaded into the DADF with the top of the original document toward the left side of the machine or an original document placed on the scanner glass with the top of the original document toward the right side of the machine. 5.Press Start on the control panel to begin copying. ID card copying 1.Press Copy from the display screen. 2.Press the Advanced tab > ID Copy from the display screen. 3.Select a tray in Paper Source. 4.Follow the steps on the display screen. 5.Place the front side of an original facing down on the scanner glass as shown below, and close the DADF. When you place an original on the scanner glass, leave a little space between the edge of the scanner glass and the original. Otherwise, part of original may not be printed. 6.Press Start on the control panel. Then the machine starts scanning. 7.Turn the original over and place it on the scanner glass as shown below, and then close the DADF. When you place an original on the scanner glass, leave a little space between the edge of the scanner glass and the original. Otherwise, part of original may not be printed. 8.Press Start on the control panel to begin copying. N-up copying 1.Press Copy from the display screen. 2.Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 38). 3.Press Advanced tab > N-Up from the display screen. 4.Press an option according to how many images to copy onto one page. Copies an original onto one sheet of paper. Copies corresponding numbers of separate originals to one page. Depending on original document size, output paper size, and the reduced rate of image, some options may be inactivated. 5.Select a tray in Paper source. 6.Press the appropriate page order. 7.Press Start on the control panel to begin copying. If an original is placed on the scanner glass, the machine shows the window asking if you want to place another page. Load another original and press Yes. When you finish, press No on this window. Booklet copying 1.Press Copy from the display screen. 2.Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 38). 3.Adjust the settings for each copy such as Duplex and more in the Basic tab (see "Changing the settings for each copy" on page 52). 4.Press the Advanced tab > Booklet from the display screen. 5.Select a tray in Paper Source. 6.Press the appropriate option. Disables this feature. Book copying 1.Press Copy from the display screen. 2.Place a book page face down on the scanner ...

Download now

Please, enter two numbers from picture: