Votes - 1, Average rating: 5 ( )

Manafacture: FARGO electronic File size: 9.4 mb File name: Language of manual:

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 7-50 Defining the Area to activate the Card Grid Step Procedure 1 Select on the appropriate Defined Area (see below) to activate the card grid in the upper half of the window. . It is through this card grid that up to five areas can be defined, as shown below. . When the card grid is first activated, then a small black square will appear at its default size of .2 x .2 (5mm x 5mm) and at its default location in the lower left-hand corner (0,0). (Note: This square represents the first defined area.) RESTRICTED USE ONLY Fargo Electronics, Inc. Measuring the Total Card area Step Procedure 1 Determine the area of the card to define. (Note: This area is indicated by the dashed outline, as shown below. The easiest way to determine the size of this area is to actually print a card and look at it in the same orientation as when it exits the Printer.) 2 Measure the total area and enter those dimensions into the dimension boxes. (Note: The minimum size an area can be is .2 x .2 (5mm x 5mm).) HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) RESTRICTED USE ONLY Fargo Electronics, Inc. Measuring the Area to be positioned on the Card Step Procedure 1 Once the area is sized properly, measure the location where this area is to be positioned on the card. a. Measure from the lower left corner of the card up and over to the lower left corner of where the defined area is to begin. b. Enter these values into the X and Y boxes, as shown below. c. Note that the card grid lines are spaced at .2 (5mm) intervals. HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 7-53 Selecting the Print YMC under the K and Print K Only options Step Procedure 1 Use the Defined Area function. a. Define an area by clicking on the Defined Area UP arrow. (Note: Another .2 x .2 (5mm x 5mm) area will appear in the lower left-hand corner. This is the location in which all newly defined areas will first appear. Up to 5 areas can be defined.) . Additional areas cannot be added until the most recently created area has been moved or sized. For this reason, size and position each area as it is created. . Use the Defined Area arrows to navigate back and forth from area to area. The active area will always be highlighted with a dotted outline. b. Delete an area by using the Defined Area arrows to select the area and click on the Delete button. (Note: If all areas are deleted, the K Panel Resin options will automatically be deselected.) 2 Select the Print YMC Under K option to print all black in the designated areas with the Yellow (Y), Magenta (M) and Cyan (C) Ribbon Panels directly beneath the resin black (K) Panel. (Note: Select this option if printing resin black text or barcodes onto a colored background to provide a more gradual transition between the two.) OR Select the Print K Only option to print all black in the designated areas only with the resin black (K) Panel or to print resin black onto a white background to maximize the sharpness of printed text and barcodes. RESTRICTED USE ONLY Fargo Electronics, Inc. Using the Magnetic Encoding tab Use these options only if the Printer has an optional Magnetic Stripe Encoding Module installed. (Note: The HDP600 CR100 Printing Preferences window has the same Magnetic Encoding tab functionality as the HDP600 Printing Preferences window.) Step Procedure 1 Select the Magnetic Encoding tab to display options for controlling the Magnetic Stripe encoding process. (Note: The following describes these options and the Printer's magnetic encoding process.) HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 7-55 Using the Encoding Mode option Use the Encoding Mode option to specify which magnetic encoding standard to use. . The HDP Card Printer can be installed with one of two types of factory-installed Magnetic Stripe Encoding Modules. . Change the encoding mode and coercivity setting or modify the ISO standards for tracks 1, 2 and 3, by correctly modifying these Magnetic Encoding options. RESTRICTED USE ONLY Fargo Electronics, Inc. Using the Encoding Mode option (continued) Step Procedure 1 Select the ISO Standard Encoding Module with a dual-coercivity (high or low) encoding head. (Note: By default, the Printer Driver is set to encode according to ISO standards onto high-coercivity Magnetic Stripes.) OR Select the JIS II Standard Encoding Module commonly used in Japan. Select the JIS II mode to encode only Track 2. (Note #1: The JIS II option provides encoding compatibility with the JIS C 6220 Type II cards commonly used in Japan. No encoding customization options are available with the J...

Download now

Please, enter two numbers from picture: