Votes - 4, Average rating: 3.5 ( )

Manafacture: Citizen File size: 949.65 kb File name: Language of manual:

1.00 - 11 SRP-350/352plusIIA&C • Table 1 – Baud rate (bps) Selection Transmission Speed 1-6 1-7 1-8 Default 2400 ON OFF OFF 9600 4800 ON OFF ON 9600 OFF ON OFF 19200 OFF OFF OFF 38400 OFF ON ON 57600 OFF OFF ON 115200 ON ON ON • Table 2 – Print Density Selection Print Density 2-5 2-6 Default 1 (Light) ON ON 22 (Medium) OFF OFF 3 (Dark) OFF ON 1-4-3 Auto Cutter Enable / Disable selection Dip Switch Set 2 SW 2-3 ON Auto Cutter Disabled OFF Auto Cutter Enabled Application Ignores Auto Cutter error for continuous printing. Rev. 1.00 - 12 SRP-350/352plusIIA&C 1-5 Setting the Memory Switches This printer has “Memory Switch” set which is software switches. Memory Switch set has “MSW1”, “MSW2”, “MSW8”, “MSW9” “Customize value”, “Serial communication condition”. “Memory Switch setting utility” can change the Memory Switch set to ON or OFF as shown in the table below. (default : all OFF) . NOTE The Memory Switch is available to be changed by three methods. - Memory Switch setting utility. - Control from BXL/POS command. Settings of the Memory Switch are stored in the NV memory : therefore, even if the printer is turned off, the settings are maintained. MSW1 Switch Function ON OFF 1 Select Print Speed Refer to following Table 2 3~8 Reserved --Fixed to OFF 180dpi MSW 1-2 MSW 1-1 Print Density Remark OFF OFF Print Density 3 250mm/s OFF ON Print Density 2 230mm/s ON OFF Print Density 1 200mm/s 203dpi MSW 1-2 MSW 1-1 Print Density Remark OFF OFF Print Density 3 230mm/s OFF ON Print Density 2 200mm/s ON OFF Print Density 1 180mm/s MSW2 Switch Function ON OFF 1 Specification for Destination Double byte Country Single byte Country 2 Reserved --Fixed to OFF 3 Code Page Selection Refer to following Table 4 5 6 7 8 Rev. 1.00 - 13 SRP-350/352plusIIA&C MSW2-8 MSW2-7 MSW2-6 MSW2-5 MSW2-4 MSW2-3 Character Table OFF OFF OFF OFF OFF OFF Page 0 437 (USA, Standard Europe) OFF OFF OFF OFF ON OFF Page 1 Katakana OFF OFF OFF ON OFF OFF Page 2 850 (Multilingual) OFF OFF OFF ON ON OFF Page 3 860 (Portuguese) OFF OFF ON OFF OFF OFF Page 4 863 (Canadian-French) OFF OFF ON OFF ON OFF Page 5 865 (Nordic) OFF OFF ON ON OFF OFF Page 16 1252 (Latin I) OFF OFF ON ON ON OFF Page 17 866 (Cyrillic #2) OFF ON OFF OFF OFF OFF Page 18 852 (Latin 2) OFF ON OFF OFF ON OFF Page 19 858 (Euro) OFF ON OFF ON OFF OFF Page 21 862 (Hebrew DOS code) OFF ON OFF ON ON OFF Page 22 864 (Arabic) OFF ON ON OFF OFF OFF Page 23 Thai42 OFF ON ON OFF ON OFF Page 24 1253 (Greek) OFF ON ON ON OFF OFF Page 25 1254 (Turkish) OFF ON ON ON ON OFF Page 26 1257 (Baltic) ON OFF OFF OFF OFF OFF Page 27 Farsi ON OFF OFF OFF ON OFF Page 28 1251 (Cyrillic) ON OFF OFF ON OFF OFF Page 29 737 (Greek) ON OFF OFF ON ON OFF Page 30 775 (Baltic) ON OFF ON OFF OFF OFF Page 31 Thai14 ON OFF ON OFF ON OFF Page 32 Hebrew Old code ON OFF ON ON OFF OFF Page 33 1255 (Hebrew New code) ON OFF ON ON ON OFF Page 34 Thai11 ON ON OFF OFF OFF OFF Page 35 Thai18 ON ON OFF OFF ON OFF Page 36 855 (Cyrillic) ON ON OFF ON OFF OFF Page 37 857 (Turkish) ON ON OFF ON ON OFF Page 38 928 (Greek) ON ON ON OFF OFF OFF Page 39 Thai16 ON ON ON OFF ON OFF Page 40 1256 (Arabic) ON ON ON ON OFF OFF Page 41 1258 (Vietnam) ON ON ON ON ON OFF Page 42 Khmer (Cambodia) OFF OFF ON OFF OFF ON Page 47 1250 (Czech) MSW3 Switch Function ON OFF 1 Select Emulation Refer to following Table 2 3 4~8 Reserved --Fixed to OFF MSW 3-3 MSW 3-2 MSW 3-1 Emulation Remark OFF OFF OFF Emulation 1 ESC / POS OFF OFF ON Emulation 2 OFF ON OFF Emulation 3 OFF ON ON Emulation 4 ON OFF OFF Emulation 5 Rev. 1.00 - 14 SRP-350/352plusIIA&C MSW4 Switch Function ON OFF 1 Reserved --Fixed to OFF 2 Reserved --Fixed to OFF 3 Single byte Font Selection Refer to following Table 4 5~8 Reserved --Fixed to OFF MSW 4-4 MSW 4-3 Single byte Font Selection Remark OFF OFF Font A 12 x 24 OFF ON Font B 9 x 17 ON OFF Font C 9 x 24 ON ON --Fixed to OFF MSW5 Switch Function ON OFF 1~2 Reserved --Fixed to OFF 3 2Color support Enable Disable 4~6 Reserved --Fixed to OFF 7 2inch Left mode Enable Disable 8 2inch Center mode Enable Disable MSW6 Switch Function ON OFF 1 Auto internal buzzer after cutting Enable Disable 2 Auto internal buzzer option 1 time 3 time 3 Auto internal buzzer with cash drawer Enable Disable 4 Auto external buzzer after cutting Enable Disable 5~8 Reserved --Fixed to OFF MSW11 Switch Function ON OFF 1~8 Reserved --Fixed to OFF Rev. 1.00 - 15 Rev. 1.00 - 16 - SRP-350/352plusIIA&C 1-6 Installing or Replacing the Paper Roll . NOTE Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. 1-6-1 Make sure that the printer is not receiving data; otherwise, data may be lost. 1-6-2 Open the paper roll cover by pressing the cover-open button. . NOTE Do not open the print cover while the printer is operating. This may damage the printer. 1-6-3 Remove the used paper roll core if there is one. 1-6-4 Insert the paper roll as shown. Rev. 1.00 - 17 - SRP-350...

Download now

Please, enter two numbers from picture: