Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
If it doesn’t, turn off the printer and push firmly on the duplexer to be sure it is firmly seated in the printer, then turn on the printer and print the MenuMap again. 7. If you will always be using duplex printing, go into the printer menu and change the default setting for DUPLEX to ON: a. Press + until you see PRINT MENU on the display. b. Press ENTER. c. Press + until you see DUPLEX on the display. d. Press ENTER. e. Press + to change the setting from OFF to ON. f. Press ENTER to engage the setting, then press ON-LINE to save the setting and exit the menu. Activate the Duplexer in the Printer Driver ® Windows PCL Driver (C5400, C5400n) Click Start ^Settings ^Printers [Printers and Faxes for XP]. The Printers (Printers and Faxes) dialog box opens. 8. Right click the PCL printer icon, then click Properties 9. Click the Device Option(s) tab. 10.Click Duplex Option Unit. 11.Click OK, then close the Printers (Printers and Faxes) dialog box. Postscript Emulation Driver (C5400n) 1. Click Start ^Settings ^Printers [Printers and Faxes for XP]. The Printers (Printers and Faxes) dialog box opens. 2. Right click the Postscript emulation printer icon, then click Properties. 3. Next: - Windows XP, 2000 and NT 4.0: click the Device Settings tab. - Windows Me and 98: click the Device Options tab. 4. Under Installable Options, click Duplex and select Installed. 5. Click OK, then close the Printers (Printers and Faxes) dialog box. Hiper-C Driver (C5150, C5200) 1. Click Start ^Settings ^Printers [Printers and Faxes for XP]. The Printers (Printers and Faxes) dialog box opens. 2. Right click the printer icon, then click Properties. 3. Next: - Windows XP, 2000 and NT 4.0: click the Device Option(s) tab. - Windows Me and 98: click the Printer Properties tab, then click the Device Option tab. 4. Select Duplex Option Unit. 5. Click OK, then close the Printers (Printers and Faxes) dialog box. ® Macintosh OS 8.x and 9.x (C5400n) 1. Activate Chooser from the Apple menu. 2. Select LaserWriter 8. 3. Click Printer ^Setup. 4. Click Configure. 5. Change the Duplex Unit setting to Installed. 6. Click OK twice. 7. Close Chooser. OS X to X.1 (C5400n) No activation is required. (continued on back) © 2004 Oki Data Americas, Inc. 58368601 OS X.2 (C5400n) 1. Activate Print Center from Local Hard Drive ^Applications ^ Utilities ^Print Center. 2. Highlight the printer name and select from the menu Printers ^ Show Info. 3. Click the box next to Duplex. 4. Click Apply Changes and exit to the desktop. Setting Duplexing as the Printing Default on the Macintosh OS Classic If you will always utilize duplex printing: 1. Access the printer driver via an application (File ^Print). 2. Select Layout in the drop down menu at the left. 3. Click the box to enable Print on Both Sides. 4. Select the desired binding position and make any other adjustments desired. 5. Click Save Settings. OS X If you will always utilize duplex printing: 1. Access the printer driver via an application (File ^Print). 2. Select Duplex in the drop down menu at the left. 3. Click the box to enable Print on Both Sides. 4. Select the desired binding position and make any other adjustments desired. 5. Save your printer profile preset with a descriptive name, e.g. Duplex Enabled. 6. Use this preset every time duplexing is required....