The 900-0056 uses advanced technolo- gy to monitor for carbon monoxide levels in your home and features a NighthawkTM, electrochemical sensor, the world’s most accurate carbon monoxide sensing technology*. The digital display feature allows for easy viewing of carbon monoxide levels. Consumer Benefits The Kidde 900-0056 AC powered, plug-in carbon monoxide alarm provides you and your family a warning signal against the dangers of carbon monoxide levels in your home. This alarm is easily installed

(8.2 kg) Warranty Two year full warranty on instrument The H25-IR instrument, along with its probe type and hose length, is ordered by specifying 3 codes. The codes Ordering Information ProbesStandard Probe, LED & Button Contains a button that can be configured to either zero the unit or switch between the instrument’s search and measure modes. Also contains an LED that provides visual feedback. The LED can be configured to blink with increasing frequency as the measured leak rate increases or l

Bacharach, Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Bacharach, Inc. Copyright © 2003 . 2006, Bacharach, Inc., all rights reserved. BACHARACH® is a registered trademark of Bacharach, Inc. All other trademarks, trade names, service marks and logo

If you have any questions about the operation or installation of your alarm, please call our toll free Consumer Hotline at 1-800-880-6788. 810-1439 REV. B Table of Contents About this User’s Guide . . . . . . . . . . . . . . . . . .3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . .4 Quick Set Up Guide . . . . . . . . . . . . . . . . . . . . .5,6 Part One – Your Kidde CO Alarm •About your CO alarm . . . . . . . . . . . . . . . . . .7-17 •What CO alarms can and cannot do . . . . .

Locate the second reset button to the left of the CPU reset button. Hold the left button in, press and release the CPU reset button. There will be 5 beeps (beep/beep – beep/beep – beep). Release the left button. The monitor will now be reset A second way to reset the HGM300 CPU is to turn off power, press and hold the left hand reset button and re-apply power – 5 beeps and release button. RDM800 CPU RESET Shut off power to the RDM800, press and hold the top right adjacent button and re-apply pow

The instrument can be used to locate and quantify leaks as well as log and totalize the entire group of leaks in a system to ensure quality assurance compliance. The unit is capable of detecting 29 of the most commonly used refrigerants and halogen gas compounds. Additional gas-specific models are available for R-600a and SF6. Industrial Refrigerant Leak Detector Infrared Technology Fewer False Alarms Fast Response Time • Utilizes Infrared Technology for Detection ensures long sensor life and hi

This alarm is suitable as a Single and/or Multiple Station Please take a few minutes which should be saved for future passed on to any subsequent owner. If you have any questions about operation or installation of your alarm, please call our toll free Consumer Hotline at 1-800-880-6788. WARNING: This carbon monoxide alarm is not a substitute for installing and maintaining an appropriate alarms in the house. This carbon monoxide alarm will not sense smoke, fire or any poisonous gas other than mon

It will probably be necessary to apply store lubricant to the Cup, revrap, and repeat the procedure several tine» before a satisfactory thin, even filn renains. Do not apply too nuch lubricant or seepage vill result vben TRUE-SPOT is stored. After Cylinder bore is lubricated; vork lubricant renaining on uuslin cloth onto outer rim of Cup and reassemble TBDE-SPOT. Parts List for TRUE-SPOT® Smoke Tester (21-7012) 1. laeberaeh Xaeorporete4 nrrati to btjw thet at fib* tiae of 4«livery this ptoSe

Please have the following information ready when calling: CO Alarm Model Number (Located on the back of alarm): CO Alarm Assembly Number (Located on back of alarm): Date of Manufacture (Located on back of alarm): Date of Purchase: Where Purchased: ATTENTION Please take a few minutes to thoroughly read this manual which should be saved for future reference and passed on to any subsequent owner. 810-2132 REV B Table of Contents Carbon Monoxide Overview .................................. 3 Kidde Pr

The default value is 100 feet. Note that setting this value to “0” causes the zone to be bypassed during normal operation, and the word “DISABLED” in appear in place of the zone’s PPM reading in the Zone Screen (Page 44). 1. Press the DISTANCE key to adjust the distance value. 2. Use the LEFT/RIGHT cursor keys to move across the entry field and the UP/DOWN cursor keys to modify the setting. 3. Press ENTER to accept the new entry or QUIT to revert to the previous setting. Instruction 3015-4275 Av