Votes - 2, Average rating: 5
(
)
)
|
manual abstract
It is an ideal supplement to common smoke detectors because it is insensitive to the usual vapors and household products, in low concentrations. The carbon monoxide detector does not respond to smoke particles and heat, and therefore it shall only be used in addition to smoke or heat detectors. Besides, the size of the fire area shall not exceed 50m2. The proven ADM loop techno protocol establishes a perm Operating voltage logy with Apollo/Discovery The detector can be attached to different types of ba-lanent communication bet- ses, and it can be protected against theft. Supply through loop voltage Current consumption typ. 400|jA (quiescent) Ambient temperature 0°C to +40°C (no condensation) Relative humidity 15 - 90% (no condensation) Dimensions 0 x H 100 x 42 (mm) Colour white Weight 105g Order number 243100 Order name CO-Detector/Anal./Disc/Apo AC-58000-300 ween the fire detection control panel and the detector. That ensures a periodical function testing of the detector. The two LEDs with 360° visibility indicate the activated condition of the detector. The detector address is selected by means of a code card in the detector base. Therefore the detector can be changed without additional tools. Building Safety. Building Security. © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX. +43 1 52114-27 OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED AC-58000-300 DBL LST EN 0804.PDF • PAGE 1...