Login:
Sorted: Name ↓   Downloads   Rate   Size ↑  
downloaded: 15   File size: 679 kb   Manafacture: John Lewis  
Category: Dishwashers
@name

If the appliance is partially loaded and the dishes lightly soiled, the "prewash", "main wash", and "rinse" phases of the programme are shorter and the water consumption level is lower. If the appliance is fully loaded and the dishes heavily soiled, the "prewash", "main wash", and "rinse" phases of the programme are longer and the water consumption level is higher. During the "Automatic" programme the temperature of the main wash water is also automatically adjusted between 50°C and 65°C dependi

downloaded: 32   File size: 913 kb   Manafacture: John Lewis  
Category: Dishwashers
@name

Fill the salt container and the rinse aid dispenser. 2. Adjust manually and electronically the water softener to the highest level. 3. Start a washing programme without dishes. 4. When the washing programme is completed, adjust the water softener to the water hardness in your area. 5. Adjust the rinse aid dosage. 17 Select and start a washing programme Starting the washing programme 1. Switch on the appliance. Make sure that the appliance is in setting mode. 2. Select a washing programme. Refer

downloaded: 17   File size: 656 kb   Manafacture: John Lewis  
Category: Dishwashers
@name

Attention! Hot steam may escape when the door is opened. Open the door carefully. Interrupt a washing programme in progress Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted. Cancel a washing programme in progress Open the dishwasher door. Press simultaneously function buttons 2 and 3 for about 2 seconds.After about 2 seconds all the programme indicator lights will illuminate indicating that the running programm

downloaded: 35   File size: 3 mb   Manafacture: John Lewis  
Category: Dishwashers
@name

Make sure that the connection is correct. The water inlet hose is damaged. Make sure that the water inlet hose has no damages. The appliance does not drain the water. There is a blockage in the sink spigot. Clean the sink spigot. The connection of the water drain hose is not correct. Make sure that the connection is correct. The water drain hose is damaged. Make sure that the water drain hose has no damages. The anti-flood device is on. Close the water tap and contact our extended warranty admin

downloaded: 26   File size: 3 mb   Manafacture: John Lewis  
Category: Dishwashers
@name

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance. If you are unsure of the meanings of these warnings contact the John Lewis branch from which you purchased the appliance. In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensu

downloaded: 32   File size: 2 mb   Manafacture: John Lewis  
Category: Dishwashers
@name

supply. 28 29 Water drain connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. To a stand pipe provided with venthole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or l

downloaded: 20   File size: 647 kb   Manafacture: John Lewis  
Category: Dishwashers
@name

The following symbols are used in the text: 1 Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance. 3 Useful tips and hints 2 Environmental information 3 Your dishwasher is fitted with the new “PULSE WASH” dishwashing system. With this dishwashing system the motor speed and spray pressure are varied during the dishwashing cycle to achieve better cleaning of the dishes. It is for this reason that the noise level v

downloaded: 37   File size: 2 mb   Manafacture: John Lewis  
Category: Dishwashers
@name

Indicator lights Salt 1) Comes on when the special salt has run out. Rinse aid 1) Comes on when the rinse aid has run out. Indicator lights Multi tab Indicates the activation/ deactivation of the Multi tab function (See 'Multi tab function'). 1) The salt and rinse aid indicator lights are never on while a washing programme is running even if filling with salt and/or rinse aid is necessary. 7 The digital display The digital display indicates: • The level of hardness to which the water softener is

downloaded: 21   File size: 625 kb   Manafacture: John Lewis  
Category: Dishwashers
@name

This information has been provided in the interest of your safety.You MUST read it carefully before installing or using the appliance. Installation . This appliance is heavy. Care should be taken when moving it. . Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged, you should contact the John Lewis Branch from which you purchased. . For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any w

downloaded: 33   File size: 674 kb   Manafacture: John Lewis  
Category: Dishwashers
@name

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance. If you are unsure of the meanings of these warnings contact the John Lewis branch from which you purchased the appliance. Installation • This appliance is heavy. Care should be taken when moving it. • Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged, you should contact the John Lewis branch from which you





Category