• Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : Important The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance. This appliance is not designed to be used by people (including children) with reduced physical, sens

User instructions 24 5. Cleaning and maintenance Before carrying out any work, always unplug the appliance from the electrical supply or switch off the all-pole disconnection device. 5.1 General warnings and recommendations Avoid the use of acidic or abrasive detergents. Clean the outer surfaces and door-lining of the dishwasher regularly using a soft cloth moistened with water or with a normal detergent suitable for painted surfaces. Clean the door gaskets with a damp sponge. Periodically (once

•Only run the dishwasher when fully loaded. •Place hollow items (bowls, glasses and pans) face down in the basket. •Do not put dishes or cutlery with tobacco ash, wax, lubricating grease or paint residues in the dishwasher. Before First Use •Set the water softener level as required by the water hardness in the area. •Add 2kg of salt into the salt compartment and then fill with water to the top of the salt compartment. •Remove all the packaging materials from the interior of the dishwasher. •Fill

When you then use separate detergents again, you should fill the salt and rinse aid compartments, adjust the water hardness setting to the maximum and run an empty wash, then adjust the water hardness setting and the rinse aid setting to the appropriate level. Salt To ensure the best efficiency, the dishwasher needs soft water. Hard water means that lime residues remain on the dishes and the interior of the dishwasher, affecting performance. The softener system is designed to remove the ions tha

Clean them only in the manner specified in the Cleaning and Maintenance section. • Use only the cleaning solutions specified in this manual to clean the dishwasher. Other cleaning solutions could produce dangerous fumes, cause corrosion of the metal parts and could permanently damage the finishes. • Use only detergents and rinse aids designed for use with a residential dishwasher. • Store all detergents and rinse aids out of the reach of children. Dacor® Dishwasher Important Safety Instructions

Dacor® Dishwasher Problem Solving Problem: May be caused by: What to do: Yellow or brown marks (cont.) Washing copper with sterling silver Yellow film on sterling silver results when you wash copper utensils in same load. Silver polish will usually remove this type of stain. Tea or coffee (tannic acid) stains Remove tea or coffee stains by hand using a solution of . cup bleach and 3 cups warm water. (Do not use on sterling silver or silver plate.) Discoloration of stainless steel, silver plate A

Make sure that items do not obstruct movement of spray arms. If necessary, clear any obstructions. Make sure holes in spray arms are not blocked. If necessary, clear holes with a pointed object and rinse under water. Strainer blocked Check strainer. Clean if necessary. Excessive foam in the machine Use only “dishwasher” detergent. Too much rinse aid in final rinse cycle. Adjust rinse aid dispenser (see page 15). Flatware incorrectly loaded Make sure items are not nested (see page 11). Clean-abil

Open the door. 2. Press the START/STOP button. 3. After a brief pause, the dishwasher will resume the previous cycle. START STOP Sanitizing the Dishes SANI-RINSE If you want a high temperature rinse after the wash cycle for maximum sanitization: 1. Press the NORMAL button to select the normal wash cycle. 2. Press SANI-RINSE. (Pressing SANI-RINSE a second time will turn sani-rinse off again.) 3. Press START/STOP. 4. Close the door. After a short pause, the dishwasher will start. SANI RINSE NORMAL

NORMAL HEAVY RINSECRYSTAL 3. Press START/STOP. The numeric display will show the length of the cycle in minutes. 4. Close the door. START STOP 5. Push on the door handle to make sure that the door is completely shut. After a brief pause, the dishwasher will start. Adding a Dish After You Start You can add a dish, if needed, after starting your dishwasher. Dacor recommends that you only add items during the first five minutes of operation to make sure they get clean. To add a dish: 1. Open the do