Votes - 0, Average rating: 0
(
)
)
|
manual abstract
cup of distilled white vinegar solution on the top rack. Close the door and allow the cycle to inish. Dishwasher not 1. Restriction in the water supply system. 1. Ensure that the water supply valve (typically located under illing with water 2. Previous wash cycle was not completed. 3. Delay-start is active. kitchen sink) is open and check that the water supply line has no kinks and clogs. 2. Refer to “Canceling a cycle” and “Changing a cycle” information in the Operating the Dishwasher section of this Use & Care Guide. 3. Cancel the delay-start or wait until delay-start time completes (times out). Refer to the “Delay Start” section of this manual. Water Leaks 1. Suds 2. Door seal could be pulled away from track. 3. Condensation vent is blocked. 4. Improper installation. 1. Wrong type of detergent results in suds and leaks. Use only dishwasher detergents. If suds still persist, then add one tablespoon of vegetable oil at the bottom of the dishwasher and run the desired cycle. Also wipe up excess rinse agent to prevent sudsing. 2. Ensure that door seal is in the track. 3. Ensure that condensation vent is not blocked. Refer to “Loading Extra Tall Items” in the Rack Features and Accessories section of this Use & Care Guide. 4. Have proper installation veriied by qualiied personnel (water supply, drain system, leveling, plumbing). Tub stains 1. Stains on the dishwasher interior are due to hardness of water. Check your water hardness settings. Refer to the Water Softening System and Salt section of this manual. 2. Silverware in contact with tub. 1. Concentrated Lemon juice can reduce the build up of hard water stains. Run a normal cycle until it lushes and interrupt the cycle and then place an 8 oz. cup of the concentrated lemon solution on the top rack and inish the cycle. This can be done periodically to avoid build up. 2. Ensure that the silverware does not make contact with the tub while running a cycle. Spots and-Incorrect rinse agent setting. Depending on the hardness of water, adjust the rinse agent Streaks on dispenser. Refer to “Adding Detergent and Rinse Agent” glassware or section in this manual for adjustment. residue on the dishes Fascia panel discolored or marked Abrasive cleaner used. Use mild detergents with soft damp cloth. Noise during The dishes may not be arranged properly. Water circulation sound is normal, but if you suspect items are wash cycle banging into each other or into the spray arms, refer to the “Preparing and Loading” section of this manual for optimal arrangement. Detergent 1. Improper operation of detergent cover. 1. Refer to “Adding Detergent and Rinse Aid” section of dispenser cover 2. Previous cycle has not been inished, reset, or this manual for instructions on opening and closing the will not shut cycle was interrupted. dispenser. 2. Refer to “Canceling a cycle” and “Changing a cycle” information in the Operating the Dishwasher section of this Use & Care Guide. Unable to select desired cycle Previous cycle has not inished. Refer to “Canceling a cycle” and “Changing a cycle” information in the Operating the Dishwasher section of this Use & Care Guide. 20 Dishwasher did 1. Did not run a sanitizing cycle 1. Select a cycle that is intended to sanitize. See not sanitize 2. Opened door mid-cycle Dishwasher cycles and options section for more information. 2. Do not open the door while the wash cycle is running. Dishwasher not 1. Kinked or Crushed Drain Hose 1. Check Drain Hose for proper installation. Note: In the draining 2. No high Loop in Drain Hose 3. Food Disposer plug not removed 4. The airgap may need cleaning 5. A home plumbing issue. Installation Process, do not rotate the Drain Hose after it is attached to the dishwasher. Refer to Installation Instructions for details. 2. Make sure that a portion of the Drain Hose is at least 20” from the loor. Refer to Installation Instructions for details. 3. If your Drain Hose is attached to the Food Disposer make sure the plug in the Food Disposer was removed. 4. Clean the air gap periodically to ensure proper drainage of the dishwasher. With most types, you lift off the chrome cover. Unscrew the plastic cap. then check for any soil buildup. Clean if necessary. 5. In this case, a certiied plumber would need to check. Etching 1. Type of glass - some glassware is sensitive to 1. Make sure that glasses are Dishwasher safe. Select a (permanent temperature cycle that does not get as hot. Do not use the Heated cloudiness) 2. Too much detergent Dry option. “Sudsing” 3. Too much detergent and/or wrong type of detergent and/or wrong brand of detergent. 2. The amount of detergent is based on the hardness of the water deliveried to your dishwasher and the amount of food soil present. If you pre-rinse your dishes and/ or have soft water you should reduce the amount of detergent. See Owners manual for details. 3. Reduce or change the type/brand of detergent you are using. Note: Do not pre-rinse dishes. Scraping excess food soils is all that is re...
Other models in this manual:Dishwashers - S47KMK15UC/25 (3.02 mb)
Dishwashers - S47KMK15UC/28 (3.02 mb)
Dishwashers - S47KMK15UC/29 (3.02 mb)
Dishwashers - S47KMK15UC/32 (3.02 mb)