Votes - 0, Average rating: 0
(
)
)
|
manual abstract
. If using detergents in a water-soluble protective cover: Take hold of the cover with dry hands only and put the detergent into an absolutely dry detergent dispenser only, otherwise the detergent may stick. . If you switch from combined detergents to solo detergents, ensure that the water softening system and amount of rinse aid have been set to the correct value. en Overview of programmes / Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia. Type of utensils Type of soiling Programme Possible Programme sequence additional options Prerinse 50° Clean 70° . all Intermediate rinse pots and pans, very adhesive burned- Magic Daily 70° non-sensitive in or dried-on food Final rinse 70° utensils remnants containing Drying and cutlery starch or protein Is optimised according U all to the soiling with the aid Auto 45° -65° of sensors. Is optimised according U all to the soiling with the aid Auto 45° -65° of sensors. part dried, common Prerinse mixed utensils household food and cutlery Clean 50° remnants E all Intermediate rinse Eco 50° Final rinse 65° Drying sensitive utensils, cutlery, temperature- sensitive plastic and glasses slightly adhesive, fresh food remnants IntensivZone Prerinse Express Wash/ Clean 40° e Speed Perfect Intermediate rinse (VarioSpeed) Gentle 40° Final rinse 55° Half load Drying Extra drying Clean 45° n Extra drying Intermediate rinse Quick 45° Final rinse 55° all types cold rinsing, u none Prerinse of utensils intermediate cleaning Prerinse Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Additional options en Information for test institutes Test institutes receive the information for comparability tests (e.g. according to EN60436). These are the conditions for conducting the tests, however these are not the results or consumption values. Request by e-mail to: dishwasher@test-appliances.com The product number (E no.) and the production number (FD) are required which you can find on the rating plate 9J on the appliance door. 0 Additional options * depending on model Additional options can be set with the buttons h. A Express Wash+/Speed Perfect+ (VarioSpeed+) * This function can reduce the running time by approx. 20% to 66% depending on the selected rinse programme. To obtain optimum cleaning and drying results at a reduced running time, water and energy consumption are increased. § Half load * If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load. .HygienePlus * This function increases the temperatures and retains them for an extra long time to obtain a defined disinfection performance. This increases the hygiene status. This additional option is ideal for cleaning e.g. chopping boards and baby bottles. I Intensive zone * Perfect for a mixed load. You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increased slightly. . Extra drying * An increased temperature during the final rinse and an extended drying phase ensure that even plastic parts dry better. There is a slight increase in the energy consumption. en Operating the appliance 1 Operating the appliance Programme data The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value •:‹…. Different influencing factors such as e.g. water temperature or line pressure may result in deviations. Aqua sensor * * depending on model The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water. The Aqua sensor is used according to the programme. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 3–6 litres. If the turbidity is greater, the water is drained and is replaced with fresh water. In the automatic programmes the temperature and running time can also be adjusted to the degree of soiling. Zeolith drying The appliance features a Zeolith container Zeolith is a mineral which can store moisture and heat energy and release them again. During the washing step this heat energy is used to dry the mineral and heat up the rinsing water. During the drying phase moisture from the washing compartment is stored in the mineral and heat energy is released. This released heat energy is blown into the washing compartment with dry air. This accelerates and improves drying. These processes therefore save a great deal of energy. a Caution Please ensure that the intake opening 1J is not obstructed and do not place any temperature-sensitive u...
Other models in this manual:Dishwashers - SN56V553TI/70 (3.26 mb)
Dishwashers - SN56V553TI/73 (3.26 mb)