Votes - 0, Average rating: 0
(
)
)
|
manual abstract
a Warning – If you want to add more utensils after the programme has started, do not use the tablet collecting tray 1B as a handle for the upper basket. The tablet could already be there and you will touch the partially dissolved tablet. Notes . If programmes are short, tablets may not have full cleaning effect due to different dissolving properties and there may even be undissolved detergent residue. It is recommended to use washing powder for these programmes. . The Intensive programme (on some models) requires one tab only. When using washing powder, you can apply some of this cleaning agent to the inside of the appliance’s door. . If using detergents in a water-soluble protective cover: Take hold of the cover with dry hands only and put the detergent into an absolutely dry detergent dispenser only, otherwise the detergent may stick. . If you switch from combined detergents to solo detergents, ensure that the water softening system and amount of rinse aid have been set to the correct value. Overview of programmes aus / Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. The programme data has been measured in the laboratory according to AS/NSZ 2007. Type of utensils Programme Programme data Possible Programme and soiling 1.) Duration: hs/mins additional options sequence 2.) Energy consumption in kWh 3.) Water consumption in litres 4.) With Aquasensor Pots, utensils and cutlery . Auto 65° -75° 1.) 1:40-2:15 2.) 1,00-1,30 3.) 4.) 11-15 all Highly soiled A Auto 45° -65° 1.) 1:30-2:30 2.) 0,80-1,30 3.) all 4.) 7-18 Is optimised according to the soiling with the aid of sensors. A Auto 45° -65° 1.) 1:30-2:30 2.) 0,80-1,30 3.) all Is optimised according to the soiling with the aid of sensors. Utensils and 4.) 7-18 cutlery Prerinse Normally soiled a / a 1.) 2:35 2.) 0,55 all Clean 45° Intermediate rinse Eco 45° 3.) 13,3 Final rinse 45° 4.) - Dry aus Overview of programmes E Auto 35° -45° Utensils and cutlery Lightly soiled IntensivZone Express Wash/ 1.) 1:20-1:30 Speed Perfect Is optimised according 2.) 0,70-0,85 (VarioSpeed) to the soiling with the aid 3.) Energy Save of sensors. 4.) 10-15 Half load Shine & Dry 1.) 0:29 Clean 45° n / . 2.) 0,80 Shine & Dry Intermediate rinse Quick 45° 3.) 10 Final rinse 55° 4.) 1.) 0:15 all types u / o 2.) 0,05 of utensils none Prerinse Lightly soiled Prerinse 3.) 4 4.) Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information for test institutes Test institutes can request the conditions for running comparison tests by sending an e-mail to dishwasher@test-appliances.com. Quote the appliance number (ENr.) and the production date (FD) which you can find on the rating plate 9B on the appliance door. 0 Additional options * depending on model Additional options can be set with the buttons `. Y Express Wash/ Speed Perfect/ (VarioSpeed) * This function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The change in the running time is indicated on the digital display 8. To obtain optimum cleaning results at a reduced running time, water and energy consumption are increased. § Half load * If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load. .SanitationPlus * This function increases the temperatures and retains them for an extra long time to obtain a defined disinfection performance. This increases the hygiene status. This additional option is ideal for cleaning e.g. chopping boards and baby bottles. Additional options aus I Intensive zone * Perfect for a mixed load. You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increased slightly. i Shine & Dry * By increasing the amount of water during the rinse cycle and extending the drying phase, stains are prevented and the drying result is improved. There is a slight increase in the energy consumption. Rinse aid is recommended for the Shine & Dry function (even when using combination detergents). . Energy Save * Water and energy consumption can be reduced with the “Energy Save” function. The running time is extended for optimum cleaning and drying results. aus Operating the appliance 1 Operating the appliance Aqua sensor * * depending on model The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water. The Aqua sensor is used according to the programme. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 3–6 litres. If the turbidity is greater, the water is...
Other models in this manual:Dishwashers - SN46V593AU/70 (3.66 mb)
Dishwashers - SN46V593AU/73 (3.66 mb)
Dishwashers - SX56T593AU/01 (3.66 mb)
Dishwashers - SX56T593AU/70 (3.66 mb)