Votes - 0, Average rating: 0 ( )

Manafacture: Bosch File size: 4.7 mb File name: Language of manual:

With the door closed, wait until the dishwasher completes the cycle (approximately 1 minute). Then press the ON/OFF button. You may now begin a new cycle. (For Model SHE53L0) Turn the cycle selection knob to the “Reset 3 sec.” position. Wait approximately one minute and then press the ON/OFF button. You may now begin a new cycle. Operating the Dishwasher (continued) WARNINGYou could be seriously scalded if you allow hot water to splash out of the dishwasher. OPEN THE DOOR CAREFULLY during any wash or rinse cycle. Do not fully open the door until water noises have stopped. Starting the Dishwasher To start the dishwasher, follow the instructions in Figures 19 and 20 depending the control location. Interrupting a Cycle NOTE: Should you need to interrupt a cycle (to add or remove an item, to add detergent, etc.), it is best to do so within the first 30 minutes of the cycle. Figure 20 Figure 21 Exposed Front Controls 1) Close the door 2) Turn on 3) Select a cycle 4) The unit will then start 4) Close the door to start Exposed Front Controls (See Figure 19) 1. Press the On/Off button to turn the unit off. 2. Wait at least ten seconds or until the water noises stop before opening the dishwasher door. 3. To resume the cycle, close the dishwasher door and then press the On/Off button. Hidden Top Controls 2) Turn on 3) Select a cycle 1) Open the door Hidden Top Controls (See Figure 20) 1. Open the dishwasher door just far enough to expose the control panel. 2. Press the On/Off button to turn the unit off. 3. Wait at least ten seconds or until the water noises stop before opening the dishwasher door. 4. To resume the cycle, press the On/Off button and close the dishwasher door. Figure 19 Cancel Drain Canceling or Changing a Cycle (All Models Except SHE53L0) To cancel or change a cycle, press and hold for three seconds the two buttons labeled “Cancel Drain” as shown in Figure 21. With the door closed, wait until the dishwasher completes the cycle (approximately 1 minute). Then press the ON/OFF button. You may now begin a new cycle. (For Model SHE53L0) Turn the cycle selection knob to the “Reset 3 sec.” position. Wait approximately one minute and then press the ON/OFF button. You may now begin a new cycle. Operating the Dishwasher (continued) WARNINGYou could be seriously scalded if you allow hot water to splash out of the dishwasher. OPEN THE DOOR CAREFULLY during any wash or rinse cycle. Do not fully open the door until water noises have stopped. Starting the Dishwasher To start the dishwasher, follow the instructions in Figures 19 and 20 depending the control location. Interrupting a Cycle NOTE: Should you need to interrupt a cycle (to add or remove an item, to add detergent, etc.), it is best to do so within the first 30 minutes of the cycle. Figure 20 Figure 21 Exposed Front Controls 1) Close the door 2) Turn on 3) Select a cycle 4) The unit will then start 4) Close the door to start Exposed Front Controls (See Figure 19) 1. Press the On/Off button to tur...

Download now

Please, enter two numbers from picture: