Votes - 0, Average rating: 0
(
)
)
|
manual abstract
The dishwasher must be disconnected from the electricity supply before any repairs or other work are started. Pull the mains plug out of the wall socket or switch off at the fuse box. Grasp the plug to remove it from the socket; do not tug on the cable. Turn the water off at the tap. When disposing of old appliances Appliances that have reached the end of their service life should be rendered inoperable in order to exclude the possibility of subsequent accidents. Pull the mains plug out of the wall socket, cut through the connecting cable and disable the door lock. Take the appliance to a designated waste disposal centre. Warning Children could get locked in the appliance (risk of suffocation) or get stuck in other positions. Therefore: Remove the mains plug, cut the mains wire and set aside. Damage the door lock so that the door can no longer be closed. en Getting to know your Appliance interior appliance 20 Top basket Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front. 21 22 Additional cutlery basket * for the top basket Additional cup rack * Individual positions are referred to in 23 Upper spray arm the text. 24 Lower spray arm Control panel 25 Salt dispenser 1 . Main switch 26 27 Filters Cutlery basket 2 Button M/OK: Select options, store 28 Bottom basket 3 (changed) value Buttons – and +: Select programmes 29 Lock for detergent dispenser and settings 30 Rinse-aid dispenser with refill 4 Start Button: Start programme 31 indicator Detergent dispenser 5 This display gives optical character information on the programmes, 32 Rating plate options, and settings to be selected * some models as well as on the available actions. 6 Door Opener The luminous arrows indicate whether you are able to select among other options using – or + 3 . This dishwasher is equipped with touch buttons. A gentle touch starts the function. Always keep the user interface clean and free of grease in order to prevent malfunctions. Use a dry or lightly moistened cloth only, do not use scouring or abrasive detergents. en Before using your appliance for the first time Before you can use your appliance for the first time, you must select the language. When the appliance has been switched on, the following display is output: M – < DE EN FR NL IT EL > + Start OK The language abbreviation “DE” for “Deutsch” (German) is flashing. If you want to select a different language, press – or + 3 repeatedly until the abbreviation of your desired language flashes. Confirm the language selection by pressing M/OK 2 . All following optical character messages will be displayed in the selected language. Chosen the wrong language The following steps will take you back to the language selection: 1. Switch off the device. 2. Switch on the device. Press the button M/OK 2 until the language selection is displayed. 3. Select the desired language and confirm your selection. Providing operating materials To operate the dishwasher you will require salt (only for appropriate water hardness, see chapter “Adjusting the softening system”), rinse aid, detergent. Only use products which are suitable for the dishwasher. Before using the appliance for the first time and after selecting the language, fill with salt (if required) and rinse aid and adjust the softening system. Proceed as described in the chapters “Filling with salt”, “Filling with rinse aid” and “Adjusting the softening system”. en Setting up the water softener In order to provide satisfactory rinsing results, the dishwasher requires soft water, i.e., containing little or no lime, otherwise water stains will be left behind on the dishes and interior containers. If the tap water exceeds a certain level of hardness, it must be softened, i.e., decalcified, so that it can be used in the dishwasher. This is achieved by adding a special salt to the water softener inside the dishwasher. The water softener, that is the required amount of salt, is set up according to how hard the tap water is. The softening system must be adjusted before the appliance is used for the first time or if the water hardness changes. Determine the degree of hardness of your tap water. Your water utilities company or customer service will advise you. Water hardness table Switch on the appliance with the main switch 1 . The main menu is displayed (if switching on the appliance for the first time, only when a language has been selected and dispensers have been filled with salt (if required) and rinse aid). Keep pressing button M/OK 2 until the “Hardness” setting is displayed. Using the buttons – or + 3 , select the set value between 0 and 7 which corresponds with the degree of hardness of your tap water in the following table. The factory setting is “Hardness 4”. Press the button M/OK 2 The set value is saved and you are returned to the Start menu. If the setting is “0” the softening system is switched off. Possible lack of salt will not be indicated. en Filling in the salt Note If the hard...
Other models in this manual:Dishwashers - SHVATR1/05 (2.19 mb)