Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Combination detergents function only up to a specific degree of hardness (usually 26° Clarke). Over this limit salt and rinse-aid must be added. As soon as combined detergents are used, the rinse programme is adjusted automatically to ensure the best possible rinsing and drying result. en Notes – You will obtain optimum rinsing and drying results by using solo detergents and applying salt and rinse aid separately. – If programmes are short, tablets may not have full cleaning effect due to different dissolving properties and there may even be undissolved detergent residue. It is recommended to use washing powder for these programmes. – The Intensive programme (on some models) requires one tab only. When using washing powder, you can apply some of this cleaning agent to the inside of the appliance’s door. – Even if the rinse-aid and/or salt refill indicator is lit, the rinse programme will run correctly with combined detergents. – If using detergents in a water-soluble protective cover: Take hold of the cover with dry hands only and put the detergent into an absolutely dry detergent dispenser only, otherwise the detergent may stick. – If you switch from combined detergents to solo detergents, ensure that the water softening system and amount of rinse aid have been set to the correct value. en Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia. Type of utensils Type of soiling Programme Possible additional options Programme sequence pots and pans, non-sensitive utensils and cutlery very adhesive burned- in or dried-on food remnants containing starch or protein . Intensive 70° Prerinse Clean 70° Intermediate rinse Final rinse 70° Dry O Auto 55°–65° all Is optimised according to the soiling with the aid of sensors. mixed utensils and cutlery part dried, common household food remnants a Eco 50° Prerinse Clean 50° Intermediate rinse Final rinse 65° Dry sensitive utensils, cutlery, temperature- sensitive plastic and glasses slightly adhesive, fresh food remnants e Gentle 40° Reduce Time Half load Prerinse Clean 40° Intermediate rinse Final rinse 55° Dry o Quick 45° none Clean 45° Intermediate rinse Final rinse 55° all types of utensils cold rinsing, intermediate cleaning u Prerinse none Prerinse Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information for test institutes Test institutes can request the conditions for running comparison tests by sending an e-mail to dishwasher@test-appliances.com. Quote the appliance number (ENr.) and the production date (FD) which you can find on the rating plate 9: on the appliance door. en Additional options * depending on model Additional options can be set with the buttons H. Y Express Wash/ Speed Perfect * The >>Express Wash/ Speed Perfect<< function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The change in the running time is indicated on the digital display 8. To obtain optimum cleaning results at a reduced running time, water and energy consumption are increased. § Half load * If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load. Basic functions Programme data The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value …. Different influencing factors such as water temperature or line pressure may result in deviations. Aqua sensor * * depending on model The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water. The Aqua sensor is used according to the programme. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 2–4 litres. If the turbidity is greater, the water is drained and is replaced with fresh water. In the automatic programmes the temperature and running time can also be adjusted to the degree of soiling. Switching on the appliance – Turn on the tap fully. – Close the door. – Switch on the main switch (. Indicators light up according to the last programme that was selected. This programme runs if no other programme button h is pressed. The expected programme duration is indicated on the numerical display 8. – The programme starts running. Remaining running time display When the programme is selected, the remaining running time of the programme is indicated on the digital display 8. The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme). en Timer programming * * depending on model You can delay the start ...
Other models in this manual:Dishwashers - SE24M268EU/39 (3.61 mb)
Dishwashers - SE24N861EU/36 (3.61 mb)
Dishwashers - SE24N861EU/39 (3.61 mb)