Votes - 3, Average rating: 4.7 ( )

Manafacture: Beko File size: 3.96 mb File name: Language of manual:

If you would like to disable these functions after turning the machine off and on again, you must press the relevant buttons. Start / Pause / Cancel Button (7) It is used to start, pause or cancel the selected program or the delayed start countdown. The selected program will start running when the Start / Pause / Cancel button (7) is pressed. Wait for two seconds to view the full display on the screen after you turn on the machine by pressing the On/Off button (1) before you press Start / Pause / Cancel (7) button. Program Selection Button (3) You can select the washing program you want to use with the aid of the “Program Data and Table of Average Consumption Values” after pressing the program selection button. Number of the selected program appears in the program indicator (11) on the display (6) in the format of ....... Program number will increase by one each time you press the program selection button. Number of the defined programs can change depending on the model you have purchased. Half Load Button (4) If you want to run your machine without loading it completely, place your dishes into the machine as you desire. First, press the On / Off Button (1). Select the desired program and press the Half Load (4) button. You must see the Half Load indicator (14) appearing on the screen. Start the program by pressing the Start / Pause / Cancel button (7). Thanks to the Half Load option, you can use both lower and upper baskets of your machine and you can save water and energy. Extra Drying Button (5) (Depending on the model) Some washing programs provide premium-drying performance. The programs in which the extra drying function can be enabled are indicated in the Program Data and Table of Average Consumption Values. Extra drying symbol lights up (15) on the display when you select the extra drying (5) function. Combi Tablet Button (2) Allows to obtain a better drying performance from the multi-purpose detergents called as all in one detergents such as 2in1, 3in1, 4in1, 5in1 and etc., depending on the hardness level of the tap water. The programs in which the Combi Tablet function can be enabled are indicated in the Program Data and Table of Average Consumption Values. Combi Tablet indicator light (9) lights up when you select the Combi Tablet function (2). Delayed Start Button (8) You can delay the start of the selected program until 24 hours with increments of 1 hour by means of the Delayed Start Function. Program Selection You can select the desired program after turning on the machine by pressing the On / Off button (1). Switch to the program you want to operate by pressing program selection button (3). You can follow up the program you are in from the program indicator (11) on the screen. Program number will increase by one each time you press the program selection button (Number of the defined programs can change depending on the model you have hhhpurchased). The selected washing program will start running when the Start / Pause / Cancel button (7) is pressed. Time indicator (12) will start displaying the estimated remaining time to the end of program. Total time can be different from the time indicated at the beginning since it can change while the program is running, depending on the temperature of the room where your machine is installed, temperature of the supply water, auto-cleaning of the water softening system (regeneration) and amount of the dishes. Adding Functions to the Program With the help of the add function buttons, you can run the selected program together with the Half Load (1/2) (4), Extra Drying (5), Combi Tablet (2) and Delayed Start (8) functions. You will obtain a better drying performance if you select the Combi Tablet function in cases where you use a multi-purpose detergent. To add a function to the program: 1. Select the program by pressing program selection button (3). 2. Press the button of the function that you want to enable and check to see thee indicator for the relevant function on the display. 3. You can start the program by pressing the Start / Pause / Cancel button (7). Program Steps Follow-up You can follow-up the step in which the current program is in from the Program Steps Follow-up indicator (19) on the display. a Washing Step Indicator (19 a) b Rinsing Step Indicator (19 b) c Drying Step Indicator (19 c) d End of Program Indicator (19 d) The display shows the steps for washing 19 a, rinsing 19 b and drying 19 c, respectively, while the selected program is running. Only the End of Program indicator 19 d lights up when the program is over. Remaining Time Indicator (6) displays “00:00”. Canceling a Program Press Start / Pause / Cancel button ( 7) for three seconds to cancel a program that is already running. Release the button when indicator and End of Program Indicator (19 d) start flashing above the program indicator (11) in the display. For a couple of minutes the machine will fulfill the necessary operations required for cancellation. End of Program Indicator (...

Download now

Please, enter two numbers from picture: