Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
4 lbs (1.8 kg) P/2 DA6 Plus ................... 5 lbs (2.3 kg) Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association) Listings .......................................... UL, CUL Compliances ................................. CE MTBF ............................................. 30,000 hours Warranty ....................................... 3 years parts and labor Specifications are subject to change without Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 © 2002 Extron Electronics. All rights reserved. Extron Electronics, Japan Daisan DMJ Building 6F 3-9-1 Kudan Minami Chiyoda-ku, Tokyo 102-0074 Japan +81.3.3511.7655 Fax +81.3.3511.7656 User’s Guide P/2 DA2 PlusP/2 DA4 PlusP/2 DA6 Plus Distribution Amplifiers 68-362-01 Rev. C Printed in the 08 02 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.33.453.4050 Extron Electronics, Asia 135 Joo Seng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 Fax +65.6383.4664 P/2 DA Installation and Operation, cont’d 1 P/2 DA 2/4/6 Plus • Installation and Operation P/2 DA 2/4/6 Plus • Specifications Installation and Operation 3 Specifications P/2 DA 2/4/6 Plus • Installation and Operation 2 Description The P/2 DA2 Plus, P/2 DA4 Plus, and P/2 DA6 Plus are distribution amplifiers that accept video input from a VGA-UXGA compatible PC and distribute that signal to separately buffered outputs. Each output can be extended with Extron VGA-HR cables in 6', 15', 25', 50', 75', 100', 150', 200' and 250' lengths. Examples of typical installations are shown in the diagrams on the following pages. Installation 1. Power off the computer and its local monitor. 2. For optional rack mounting (four and six output only), mount the unit on one side of a 19" 1U Universal Rack Shelf (Extron part # 60-190-01). See the illustration below. a. If feet were previously installed on the bottom of the case, remove them. b. Mount the unit on the rack shelf, as shown below, using two 4-40 x 3/16 screws in opposite (diagonal) corners to secure the case to the shelf. 3. Connect the computer’s VGA output to the input of the distribution amplifier (P/2 DA2 Plus cable or the center connector of the P/2 DA4 Plus or P/2 DA6 Plus). See rear panel diagrams on next page. 4. Connect the computer’s monitor to the “Local Monitor” output of the distribution amplifier. 5. Connect an LCD panel, a VGA-UXGA monitor, or a projector to the other output(s). 6. Connect power to the distribution amplifier. 7. Power on the local monitor, the computer, and display device(s). Indicators and Controls Power LED: Located on the front and rear panels of the P/2 DA4 Plus and P/2 DA6 Plus only. When illuminated, it indicates that the distribution amplifier is receiving power. Video Gain toggle switch: (P/2 DA4 Plus and P/2 DA6 Plus only) The Video Gain switch is normally set to 0.7V ...
Other models in this manual:Dishwashers - P/2 DA6 (621.09 kb)
Dishwashers - P/2 DA4 (621.09 kb)