Login:
Votes - 2, Average rating: 3.5 ( )

User manual Taylor, model 2750

Manafacture: Taylor
File size: 786.49 kb
File name: 2750_ib.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


It is not sealed against moisture and could be damaged if used outdoors. 2. Do not immerse the receiver unit in water. If you spill liquid on it, dry it immediately with a soft, lint-free cloth. 3. The transmitter is weather-resistant but not waterproof. Do not immerse the rain gauge in water or allow snow to accumulate in it. If this accidentally occurs, dry it immediately with a soft, lint-free cloth. 4. Though the transmitter is frost-resistant, it should not be left outdoors in snow or at temperatures at or below -4°F (-20°C). If the temperature falls below this point or if snow accumulates, remove the transmitter to an indoor area. Otherwise, permanent damage to the rain gauge's internal circuits may occur. 5. Do not clean either unit with abrasive or corrosive materials. This may scratch plastic parts and corrode electronic circuits. 6. Do not subject either unit to excessive force, shock, dust, temperature or humidity. This may result in malfunction, shorter electronic life span, damaged batteries or distorted parts. This equipment contains no user-serviceable parts. Do not tamper with either unit's internal components. Doing so will invalidate the warranty on this product and may cause damage. 7. Do not mix old and new batteries. Remove the batteries if this product will not be used for a long time. 8. Always refer to this instruction manual before operating this product. This product is warranted against defects in materials or workmanship for one (1) year from the date of original purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. Should this product require service (or replacement at our option) while under warranty, do not return to retailer. Please pack the item carefully and return it prepaid, along with a store receipt showing date of purchase and a note explaining reason for return to: Taylor Precision Products 2220 Entrada Del Sol Las Cruces, New Mexico 88001 There are no express warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. Made to our exact specifications in China. ©2004 Taylor Precision Group, LLC and its affiliated companies, all rights reserved. Taylor® is a registered trademark and Leading the Way in Accuracy™ is a trademark of Taylor Precision Products Group, LLC and its affiliated companies. All rights reserved. Range of rainfall measurement: Daily: 0-39.33 inches (0-999 millimeters) Weekly: 0-393.66 inches (0-9999 millimeters) Monthly: 0-393.66 inches (0-9999 millimeters) Resolution: 0.04 inches (1 millimeter) Accuracy: + / - 3% Transmission: 100 feet (30 meters) in an open area Transmissions sent every 30 seconds during rainfall, otherwise sent every 2. minutes Clock: Quartz precisions +/- 30 seconds per month Battery Life: 1 year (alkaline batteries recommended) How to Read Rainfall Data Trouble-Shooting Transmission Collision 1. Your Taylor® Wireless Rain Gauge will track the amount of daily, weekly, and monthly rainfall. It will also report total accumulated rainfall, which is the total rainfall recorded since the unit was last reset to zero. Press the “-“ button to toggle between the different displays. 2. A signal is sent from the transmitter to the receiver every 30 seconds when it is raining. If there is no rainfall, a signal will transmit every 2. minutes. This signal will update the data on the receiver if any changes have occurred. 3. As rainfall occurs, the Daily Rainfall Display will show the amount of rain accumulated throughout the day. When the clock reaches midnight, the display for daily rainfall will automatically reset to zero. 4. For the first day of rainfall, the Daily, Weekly, Monthly, and Total rainfall accumulation will be the same. As additional rainfall occurs throughout the week/month, the unit will add the rainfall amounts together for a weekly/monthly/ total rainfall accumulation. 5. The Weekly rainfall total accumulates from Sunday to Saturday. When the clock reaches 12:00am (midnight) every Sunday, the weekly total rainfall will automatically reset to zero. 6. The Monthly rainfall total accumulates from the first day of the calendar month to the last day. When the clock reaches 12:00am (midnight) on the first day of the month, the monthly total rainfall will automatically reset to zero. 7. Total Rainfall accumulates from the first day the rain gauge is put into use. The receiver will continue to record Total Rainfall until the user clears the memory or the batteries are replaced. 8. To manually reset either the Daily, Weekly, Monthly, or Total Rainfall accumulations, first press the “-“ button to select the memory to be cleared. Press the “+” key. The data will reset to zero. Disconnected Signals If the receiver unit does not receive a transmission for 1 hour, the display will show dashes. To correct this problem: 1. Check that the rain gauge is p...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category