Votes - 3, Average rating: 3.7 ( )

Manafacture: Bosch File size: 4.69 mb File name: 950820db-087c-4c06-8610-296dae3425cf.pdf Language of manual:

Changing the Clock Time 1. Touch Time. TIMER 1 will flash in display. 2. Turn knob to select CLOCK . 3. Touch TIME again and hour digits will flash. 4. Turn knob to change hours. 5. Touch TIME again and minute digits will flash. 6. Turn knob to change minutes. 7. Touch TIME again and the clock is set. BEEP REMINDER If operation is not completed, the oven will beep periodically as a reminder to set clock time. Push OFF. TIMER 1TIMER 1TIMER 1TIMER 1TIMER 1HR:MIN TIMER 0: 000: 000: 000: 000: 00 AM Helpful Hint To cancel the TIME selection when setting the clock, touch OFF at any time while in the clock mode. English • 5 Setting Up Your Range SELECT FUNCTIONS is the section of the menu where you can set or change the following features on your range: Getting Started VOLUME(decrease or increase loudness of control beeps) TEMPERATURE FORMAT (switch temperature scale to Fahrenheit or Celsius) TIME FORMAT (12 hr or 24 hr) LOCK KEYS(oven control pad lockout ) LANGUAGE OPTION (for display; select English, Spanish, or French) CLOCK DISPLAY (yes or no) OVEN TEMPERATURE OFFSET (used to calibrate the oven temperature) DEMO MODE(used by appliance stores) RESET DEFAULTS (changeall function settings back to original factory settings) SABBATH FEATURE (for religious faiths with “no work” requirements on the Sabbath) Accessing and Using the Select Functions Menu To access the SELECT FUNCTIONS menu, touch and hold COOKING MODE touch pad for five (5) seconds. SELECT FUNCTION is displayed. 1. Turn knob to desired feature. 2. Press START to choose any function, and turn knob to choose any sub-functions. 3. After selecting feature, touch OFF. See next page for further information. TIPS on Using Functions • There will be a slight delay before each message (or feature) can be seen in the display. • Turn knob slowly, and wait approximately one second for display to show next feature. • To move through the feature menu, slowly turn the knob clockwise one click after each feature appears. NOTE: In the event of a power failure, the functions return to the factory settings and will need to be reset. BEEPS To indicate when a mode is finished, 3 consecutive beeps will sound. Setting Up Your Range BEEP VOLUME • The volume of the control beep can be changed from LOW (softest) to HIGH (loudest). • The control default for beep volume is Medium. Changing the Beep Volume 1. Access SELECT FUNCTION Menu. 2. Turn knob clockwise until VOLUME is displayed. 3. Touch START. 4. Turn knob to select volume level Low, Medium or High. 5. Touch START. CHANGE TEMPERATURE • The oven has been preset to the Fahrenheit temperature scale. • The feature allows you to switch between Fahrenheit and Celsius temperature. Changing the Temperature Scale 1. Access SELECT FUNCTION Menu. 2. Turn knob clockwise untiL SELECT TEMP F-C is displayed. 3. Touch START. 4. Turn knob to select Fahrenheit (F) or Celsius (C). 5. Touch START to accept new selection. CLOCK DISPLAY (ON or OFF) • Clock time display can be turned off. • The default display is on. Turning the Clock Display ON or OFF 1. Access SELECT FUNCTION Menu. 2. Turn knob clockwise until CLOCK DISPLAY is displayed. 3. Touch START. 4. Turn knob once and ON or OFF will appear in display. 5. Touch START to accept new selection. DEMO MODE The demo mode is for appliance store use only. LANGUAGE DISPLAY • Language choices are English, Spanish, and French. • English is the default language. Changing the Language Display 1. Access SELECT FUNCTION Menu. 2. Turn knob clockwise until desired language is displayed. 3. Touch START. 4. Turn knob clockwise to select a different language. 5. Touch START to accept a language change. LOCK KEYS • The oven keypad can be locked for safety purposes. • This feature can be used to prevent changes to the oven function. Locking or Unlocking the Oven Control Panel 1. Access SELECT FUNCTION Menu. 2. Turn knob clockwise until LOCK KEYS is flashing. 3. Touch START. KEY PAD LOCKED is displayed. The display will beep if a key is pressed to indicate that the keypad is locked. 4. To unlock keypads, touch COOKING MODE and hold for 5 seconds. Display will read UNLOCKING KEY PAD. 5. When unlocked, the clock will again appear in the display. Note: This function DOES NOT lock oven door. OVEN TEMPERATURE OFFSET • This feature allows the adjustment of the oven temperature if food is consistently too brown or too light. Changing the Oven Temperature Offset 1. Access SELECT FUNCTION Menu. 2. Turn knob clockwise until OVEN TEMP OFFSET is displayed. 3. Touch START. 0° F is displayed. 4. Turn the knob to the right to increase temperature +25°F and to the left to decrease -25° temperature. 5. Touch START to accept a temperature change. RESET DEFAULTS • This feature is used to change all the “Select Functions” settings back to the original factory settings (or defaults). Resetting the factory settings. 1. Access SELECT FUNCTIONS Menu. 2. Turn knob clockwise until RESET DEFAULTS is displayed. 3. Touch START. Display re...

Download now

Please, enter two numbers from picture: