Votes - 3, Average rating: 3.3 ( )

Manafacture: Dacor File size: 224.92 kb File name: HB48197.pdf Language of manual:

With the Cook Period button still held set the required Cook Period using the “+” and “–” buttons. Example: 1hr 30 minutes (as shown). Note: Cook Period is the length of time the food requires to cook. Step 5 Release all buttons. The timer display will revert to the time of day with the Auto symbol lit & Cookpot symbol remaining lit. At the end of the Cook Period the “Auto” symbol will flash and an intermittent bleeping sound will be heard. The bleeping sound will continue for approximately 2 minutes unless cancelled. The “Auto” symbol will continue to flash until the timer is returned to Manual operation (see below). Step 6 Press the manual button to cancel the bleeping. (If 2 minutes has not elapsed) Step 7 Turn the oven control(s) to the OFF position. Step 8 Press the “Manual” button again to return the cooker to Manual operation. (The Auto symbol will go out). Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day. Step 2 Place food onto the correct shelf position in the oven and close the oven door(s). Step 3 Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven function. NOTE: The Cookpot symbol disappears ELECTRONIC CLOCK & AUTOMATIC OVEN TIMER OPERATION TO CANCEL AN AUTO COOKING PROGRAMME BEFORE THE COOK PERIOD HAS FINISHED. Step 1 Turn the oven control(s) to the OFF position. Step 2 Press and hold in the “Cook Period” button. Step 3 Step 4 With the “Cook Period” button still held in, return the display to 0.00 by pressing the “–” button. Release the “Cook Period” and “–” buttons and the display will revert to the time of day and the “Auto” symbol will flash. Step 5 Press the “Manual” button to return the oven(s) to “Manual” operation. The “Auto” symbol will go out. Note 1 When cooking automatically the Cook Period can be checked at any time by simply pressing the Cook Period button. OTHER NOTES ON TIMER OPERATION 1. When cooking Automatically the Cook Period can be checked at any time simply by pressing the Cook Period button. 2. When cooking Automatically the End Time can be checked at any time by simply pressing the End Time button. 3. Having set a Cook Period and End Time an electronic device stores the information. The device within the timer will switch the oven(s) on and off at the required times. 4. When setting an Auto Cooking Programme and a mistake is made, to clear:– (a) Press and hold in the “Cook Period” button. (b) With the Cook Period button still held in, return the display to by pressing the “–” button. (c) Release the “Cook Period” & “–” buttons, and the display will revert to the time of day and the “Auto” symbol will flash. (d) Press & release the “Manual” button. (e) Start the sequence again. 5. If at any time the display shows three flashing zero’s 0.00. It is likely that the electricity supply to the oven has been interrupted. Reset the timer to the correct time of day. Food in the oven may, therefore, not have been cooked, before serving check food is thoroughly heated and completely cooked. 6. To set each function always press and hold the required function button and at the same time press “+” or “–” buttons. AUTO Note: Between the hours of 22.00 & 06.00 the display dims to prevent glare. However, if you should operate a button during this period, the timer will return to normal brightness for a few seconds and then dim again. GRILL PAN & HANDLE The grill pan handle is detachable from the pan, to facilitate cleaning and storage. The grill pan handle can be fixed as follows: (a) (d) (b) (c) Step 1 Step 2 Step 3 Step 4 Step 1 Remove screw & washers from the grill pan bracket (a). Step 2 Tilt the handle over the recess (b). Step 3 Slide it towards the centre of the pan (c). Step 4 Locate the handle over the bracket (d). For a fixed handle, replace screw & washers and ensure they are fully tightened up. If a detachable handle is required, do not replace screw & washers. Note: If a fixed handle is required, the grill pan is unable to be kept in the main oven with the door closed but may be stored in the top oven with the door closed. GRILL PAN FOOD GRID AND ANTI-SPLASH TRAY TOP OVEN SHELF POSITIONING FOR GRILLING GRILL PAN FOOD GRID GRILL PAN ANTI-SPLASH TRAY NOTE: Ensure oven timer is set to Manual. Preheat the grill if indicated on grill chart. The grill pan must be placed on the correct shelf and positioned centrally under the grill element. Leave the control at 6 for toast, and for fast cooking of foods. For thicker foods requiring longer cooking, turn the switch to a lower setting after the initial sealing on both sides at 6. The thicker the food, the lower the control should be set. DO NOT line the grill pan with aluminium foil, as this increases the amount of fat spitting which can cause a fire. After use always return both controls to their OFF (0) position. ENSURE SHELVES ARE FITTED CORRECT WAY UP. DO NOT PLACE FOOD/UTENSILS DIRECTLY ON THE OVEN FLOOR SHELF POSITIONS 2 OR 3 T...

Download now

Please, enter two numbers from picture: