Votes - 0, Average rating: 0 ( )

Manafacture: Bosch File size: 3.96 mb File name: Language of manual:

Setting Meaning U Off ^ Switching on the oven lighting F Switching on the rotary spit and oven lighting The storage compartment Open the storage compartment by folding down the fascia panel. This compartment can be used to store hob or oven accessories. : Risk of fire! Never leave combustible items in the storage compartment. Accessories The accessories can be inserted into the cooking compartment at 4 different levels. Always insert them as far as they will go so that the accessories do not touch the door panel. Ensure that the accessories have always been inserted into the cooking compartment correctly. : Risk of fire! Under no circumstances should a baking sheet, a baking tray, a pan or another form of cookware be placed directly on the oven floor. This causes the floor of the appliance to overheat and can seriously damage the bottom of the fitted unit. You can pull out the accessories two thirds of the way without them tipping. This allows dishes to be removed easily. The accessories may become deformed when they become hot. As soon as they have cooled down, the deformation disappears with no effect on the function. You can buy accessories from the after- sales service, from specialist retailers or online. Accessories Description Baking and roasting wire rack For ovenware, cake tins, joints, grilled items, frozen meals. Enamelled baking tray For moist cakes, pastries, frozen meals and large roasts. Can also be used as a drip tray to collect dripping fat. Support for baking tray The baking tray can be inserted into the oven with this support. Rotary spit With rotary spit support and metal hook For roasts and large pieces of poultry. Only use in combination with the enamelled baking tray. Espresso attachment Attachment for an espresso pot, for placing on the economy burner. Optional accessories You can buy accessories from the after- sales service, from specialist retailers or online. Accessories Description Wok ring Attachment for a wok, for placing on the wok burner. When using the wok attachment, it is possible to use cooking containers with a diameter greater than 26 cm ( woks, frying pans, pots, containers with a curved base, etc. ) . Customer service number: 750290 Telescopic shelf set Telescopic shelf set for one level. After- sales service number: 689596 Pressure regulator Pressure regulator for operation with liquefied gas. After- sales service number: 751852 Before using the oven for the first time In this section, you can find out what you must do before using 2. Fully remove any remaining packaging, such as small pieces your appliance to prepare food for the first time. Read the of polystyrene, from the cooking compartment. Safety information section beforehand. 3. Some parts are covered with a protective film. Remove the Remove the appliance packaging and dispose of it protective film. appropriately. 4. Clean the outside of the appliance with a soft, damp cloth. 5. Clean the cooking compartment with hot soapy water. Baking out the oven Precleaning the oven 1. Remove accessories and hook-in racks from the cooking compartment. Heating up the oven To remove the new cooker smell, heat up the oven when it is empty and closed. 1. Turn the temperature selector to the maximum temperature. 2. Switch off the oven after 45 minutes. Recleaning the oven 1. Clean the cooking compartment with hot soapy water. 2. Fit the hook- in racks. Cleaning the burner caps and cups 1. Clean the burner caps (A) and cups (B) with water and washing-up liquid. 2. Dry the parts well. 3. Place the burner cup (B) onto the burner (C) . 4. Position the burner cap (A) exactly on the burner cup ( B) . Cleaning the accessories Before using the accessories, clean them thoroughly using a cloth and warm soapy water. Operating the hob Notes ¦ Appliances with a hob cover must only be switched on if the hob cover is open. ¦ The burner caps must always be positioned exactly on top of the burner cups. The slots on the burner cup must be free from obstruction. All parts must be dry. ¦ Ensure that the burner is not subjected to draughts caused by air conditioning systems, fans or similar appliances. Switching on the gas burner 1. Press the control knob for the required burner and turn it to the — position. The gas burner ignites. 2. Keep the control knob pressed for a few seconds until the flame stabilises. 3. Set the desired flame setting. Setting Meaning . Economy flame, lowest power Setting Meaning — Large flame, highest power The flame is not stable between positions U and — . Always select a position between — and . . If the flame goes out Switch off the control knob. Wait one minute and switch the burner on again. : Risk of fire! If the flame goes out, gas will escape. Never leave the gas burner unattended during operation. Ensure that there are no draughts. If the gas burner does not ignite In the event of a power cut or damp ignition plugs, light the gas burner with a gas lighter or a match. Switching off the gas burner Turn the co...

Download now

Please, enter two numbers from picture: