Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Cooking time The cooking time for your dish can be set on the oven. When the cooking time has elapsed, the oven switches itself off automatically. This means that you do not have to interrupt other work to switch off the oven. The cooking time cannot be accidentally exceeded. Example in the picture: cooking time 45 minutes. 1. Use the function selector to set the type of heating. 2. Set the temperature or grill setting using the temperature selector. 3. Press the 0 button twice. 0:00 is shown in the display. The time symbols light up and the Narrow is next to x. 4. Use the @ or A button to set the cooking time. Default value for @ button = 30 minutes Default value for A button = 10 minutes The oven will start up after a few seconds. The cooking time counts down in the display and the Nxsymbol lights up. The other time symbols go out. The cooking time has elapsed A signal sounds. The oven stops heating. 0:00 is shown in the display. Press the 0 button. You can set a new cooking time using the @ or A button. Or press the 0 button twice and turn the function selector to the off position. The oven switches off. Changing the cooking time Use the @ or A button to change the cooking time. After a few seconds, the change is adopted. If the timer has been set, press the 0 button beforehand. Cancelling the cooking time Use the A button to reset the cooking time to 0:00. After a few seconds, the change is adopted. The cooking time is cancelled. If the timer has been set, press the 0 button beforehand. Checking the time settings If several time-setting options are set, the relevant symbols are illuminated on the display. The time-setting options symbol is in the foreground and preceded by the Narrow. To call up the V timer, xcooking time, yend time or 0 clock, press the 0 button repeatedly until the Narrow is next to the relevant symbol. The display shows the value for a few seconds. End time You can change the time at which you wish your dish to be ready. The oven starts automatically and finishes at the desired time. You can, for example, put your dish in the cooking compartment in the morning and set the cooking time so that it is ready at lunch time. Ensure that food is not left in the cooking compartment for too long as it may spoil. Example in the picture: it is 10:30 am, the cooking time is 45 minutes and the oven is required to finish cooking at 12:30 pm. 1. Adjust the function selector. 2. Set the temperature selector. 3. Press the 0 button twice. 4. Use the @or Abutton to set the cooking time. 5. Press the 0 button. The Narrow is next to y. The time when the dish will be ready is displayed. 6. Use the @or Abutton to set a later end time. After a few seconds, the oven adopts the settings and switches to standby position. The display shows the time at which the dish will be ready and the Narrow is next to the ysymbol. The V and 0 symbols go out. When the oven starts, the cooking time counts down in the display and the Narrow is next to the xsymbol. The ysymbol goes out. The cooking time has elapsed A signal sounds. The oven stops heating. 0:00 is shown in the display. Press the 0 button. You can set a new cooking time using the @or Abutton. Or press the 0 button twice and turn the function selector to the off position. The oven switches off. Changing the end time Use the @or Abutton to change the end time. After a few seconds, the change is adopted. If the timer has been set, first press the 0 button twice. Do not change the end time if the cooking time has already started to elapse. The cooking result would no longer be correct. Cancelling the end time Use the Abutton to reset the end time to the current time. After a few seconds, the change is adopted. The oven starts. If the timer has been set, first press the 0 button twice. Checking the time settings If several time-setting options are set, the relevant symbols are illuminated on the display. The time-setting options symbol is in the foreground and preceded by the Narrow. To call up the V timer, xcooking time, yend time or 0 clock, press the 0 button repeatedly until the Narrow is next to the relevant symbol. The display shows the value for a few seconds. Clock After connecting the appliance to the mains or after a power cut, the 0 symbol and three zeros flash in the display. Set the clock. 1. Press the 0 button. The clock in the display shows 12:00. The time symbols light up and the Narrow is next to 0. 2. Use the @or Abutton to set the clock. After a few seconds, the time that has been set is adopted. Changing the clock No other time-setting option should have been set. 1. Press the 0 button four times. The time symbols light up in the display and the Narrow is next to 0. 2. Use the @or Abutton to change the clock. After a few seconds, the time that has been set is adopted. Hiding the clock You can hide the clock. For more information, please refer to the section Changing the basic settings. Childproof lock The oven has a childproof lock to prevent child...
Other models in this manual:Kitchen-ranges - HQ738256E/02 (1.79 mb)