Votes - 0, Average rating: 0
(
)
)
|
manual abstract
You can now use the protective plate safely. Otherwise, insert the protective plate into a groove at a slightly higher angle and make sure that it engages in the retainers. 4. Close the oven door so that it touches the protective plate. 5. Press the function selector and turn it clockwise to the ( grill setting. 6. Keeping the function selector pressed, push the 8 ignition button. 7. The gas escaping from the gas grill is ignited using the ignition button. To activate the safety ignition, press and hold the function selector for 10 seconds. The safety ignition is activated. If the gas flame goes out, the gas supply is automatically interrupted by the safety ignition system. 8. Check that the flame is lit. If it is not, repeat the process from step 5. 9. Press the multi- function button. The rotary spit is switched on. The oven light comes on. 10. When the dish has finished cooking, switch the function selector off. Press the multi-function button. The rotary spit is switched off. The oven light goes out. Once the oven has cooled down, remove the protective plate again. : Please note: ! The ignition device should not be actuated for more than 15 seconds. If the burner does not light within 15 seconds, wait for at least one minute. Then repeat the ignition process. Care and cleaning With attentive care and cleaning, your hob and oven will retain its looks and remain in good working order for a long time. We will explain here how you should care for and clean them correctly. Notes ¦ Slight differences in the colours on the front of the oven are caused by the use of different materials, such as glass, plastic and metal. ¦ Shadows on the door panel which look like streaks, are caused by reflections made by the oven light. ¦ Enamel is baked on at very high temperatures. This can cause some slight colour variations. This is normal and does not affect operation. The edges of thin trays cannot be completely enamelled. As a result, these edges can be rough. This will not impair the anti-corrosion protection. Upper glass cover Before opening the top cover, remove any spills with a cloth. Use glass cleaner if possible. For cleaning, remove the top cover. To do this, hold the cover securely on both sides with both hands and pull it upwards. If the cover hinges become loose, note the letters marked on them. The hinge with the letter R must be fitted on the right, and the hinge with the letter L must be fitted on the left. After cleaning, re-assemble the top cover following the same procedure in reverse order. Only close the top cover once the burners have cooled down. Cleaning agents Damage to the various different surfaces caused by using the wrong cleaning agent can be avoided by observing the following instructions. When cleaning the hob do not use ¦ undiluted washing- up liquid or dishwasher detergent, ¦ scouring pads, ¦ abrasive cleaning agents such as oven cleaner or stain remover, ¦ high-pressure cleaners or steam jets. ¦ Do not clean individual parts in the dishwasher. When cleaning the oven do not use ¦ sharp or abrasive cleaning agents, ¦ cleaning agent with a high alcohol content, ¦ scouring pads, ¦ high-pressure cleaners or steam jets. ¦ Do not clean individual parts in the dishwasher. Wash new sponges thoroughly before first use. Stainless steel Wipe with some washing- up liquid and a damp cloth. Always wipe parallel to the natural grain. Otherwise, fronts you may scratch the surface. Dry with a soft cloth. Remove flecks of limescale, grease, starch and albumin ( e.g. egg white) immediately. Do not use any abrasive materials, scouring sponges or rough cleaning cloths. The stainless steel fronts can be polished using a special care product. Follow the manufacturer's instructions. You can purchase special stainless steel cleaner from our after-sales service or from specialist retailers. Enamel surfaces and Clean with some washing- up liquid and a damp cloth. Dry with a soft cloth. lacquered surfaces Burners and steel grid of the gas burners Do not clean in the dishwasher. Remove the wire rack and clean with a sponge, washing- up liquid and some hot water. Remove the burner cup and cap. Clean with a sponge and some hot water and washing- up liquid. Ensure that the gas outlets on the burner cups are clean and unobstructed. Brush the igniters with a small, soft brush. The gas burners only work properly when the igniters are clean. Remove food residue from the burner shells with some washing-up liquid and a damp cloth. Only use a little water. Water must not be allowed to enter the appliance. Ensure that the nozzle opening does not become blocked or damaged during cleaning. Dry all parts after cleaning and place the burner cover accurately on the burner cup. If the parts are not positioned accurately, it will be harder to ignite the burner. The burner covers are coated with black enamel. Due to the high temperatures, discolouration may occur. This will not impair the function of the burner. Replace the wire rack i...
Other models in this manual:Kitchen-ranges - HGG223326Z/02 (2.37 mb)
Kitchen-ranges - HGG223326Z/03 (2.37 mb)
Kitchen-ranges - HGG223326Z/04 (2.37 mb)