Votes - 3, Average rating: 3.3 ( )

Manafacture: Heartland File size: 1.49 mb File name: Language of manual:

The bulb can then be unscrewed easily. Always handle the bulb with a dry (never wet) cloth to protect hands. If light bulb should break, disconnect power to range by unplugging it or removing the fuse from the panel before touching the bulb. When replacing the bulb, use only a 40 watt oven bulb available at your local hardware store or appliance dealer. When cleaning the oven, do not touch lens with a wet cloth. 27 Surface Burners Top burners require little care other than to wipe off the head of each burner. If a boilover occurs, the burner cap can be easily lifted out so burner port holes can be cleaned in hot soapy water with a soft brush. There are no bolts or screws to remove. The igniter must also be kept clean to ensure quick positive starts. Simply lift the burner cap and clean. When replacing, burner base cap flame spreader be sure the tab is locked securely in position on the burner base. For normal or everyday cleaning of light spills, wipe the burner caps with a damp cloth. For heavy duty cleaning— cooked spills, oil stains, etc. scrub with a tub and tile type of cleaner. Rinse thoroughly after every cleaning operation. Wipe away excess water . Avoid using abrasives on the burner base, as they may damage the finish on the burner base. Oven and Cabinet Light Replacement Before replacing lamp, disconnect the power at the main fuse or circuit breaker panel. When replacing light bulbs wait until the oven and bulb are cool. Remove oven light lens by simply unscrewing it counter clockwise. The bulb can then be unscrewed easily. Always handle the bulb with a dry (never wet) cloth to protect hands. If light bulb should break, disconnect power to range by unplugging it or removing the fuse from the panel before touching the bulb. Replace the bulb. Use only a 40 watt oven bulb available at your local hardware store or appliance dealer. When cleaning the oven, do not touch lens with a wet cloth. WARNING! Do not sit, lean, lift or stand on the doors or drawers of this range as possible injuries may result. 28 Interior Oven Rack The oven rack is designed with stop-locks so that when placed correctly on the supports, it (a) will stop before coming completely out of the oven, (b) will not tip when placing or removing food. To install, place the rack "feet" on the rack support and push the oven rack backward along the rack support (see 1 ) Push the oven rack all the way to the back until the oven rack slips off the end of the rack support (see 2 ) Then pull rack support ahead slightly to engage the "feet" with the rack support (see 3 ) To remove reverse the installation procedure. Rack SupportOven rack Oven rack "feet" 1 3 2 Rack Supports The oven rack supports are designed to interlock into the oven sides but are easy to remove. First remove oven racks (see instructions above), then grasping the lower portion of the rack support, swing it out to approx. 45 degrees and gently pull down. Assemble in reverse order. 29 Removal of Oven Door At times you may want to remove the oven door for thorough cleaning of the oven. Removal of the oven door is easy: 1) Open oven door, and latch the brass catches on to the upper leg of the hinge. (see below). Make sure the catch is securely hinged. 2) With a hand on each side of the door lift the door slightly, and pull out. 3) The door weighs about 39 LBS (18 kg) , please exercise caution when removing the door. 4) To replace the door reverse this sequence. Please ensure hinges are fully inserted into recptacle and that door is fully opened to disengage brass catches. When closing door again, please inspect brass catches to ensure that they are completely away from hinges or damage may occur. Make sure the brass catch is securely hinged Brass catch Oven door WARNING! Do not sit, lean, lift or stand on the doors or drawers of this range as possible injuries may result. 2) and pull out 1) lift the door slightly Upper leg 30 Warming Drawer These ranges are equipped with a warming drawer below the main oven. They have a variable thermostat, which is on the right side behind the drawer front. When "ON", a light will be visible on the control panel cooktop. When removing the drawer ensure that the control is set to "0" (the off position) and the drawer is cool. To remove the drawer, open the drawer until you see a plastic clip on the side of the track attached to the drawer. Simply push down on the clip on each of the tracks and pull straight out. To install the drawer simply slide the drawer back onto the track and the clips will automatically latch into place. Note: Do not use the warming drawer as a storage area. Push plastic clip down to remove slider The Broiling Pan The broiling pan griddle allows for the proper drainage of cooking grease into the lower pan. Both the griddle and pan should always be used when broiling. If aluminum foil is used in the bottom of the pan, be absolutely sure it does not block the drain vents along edges of the pan. Many grease fires are caused by i...

Download now

Please, enter two numbers from picture: