Votes - 3, Average rating: 4 ( )

Manafacture: CDA File size: 1022.33 kb File name: 6f1938cc-bc86-437a-a969-31ccad3600c4.pdf Language of manual:

• After use, please ensure that the gas taps are in the ‘Off” position. • Ensure that the appliance is correctly adjusted for the type of gas available before installation. • The use of a gas appliance produces heat and humidity in the room in which it is installed. Ensure that the room is well ventilated, either by the use of natural ventilation outlets (e.g. windows) or a ducted extractor. • This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e.g. heating rooms) should be considered incorrect and therefore dangerous. • These instructions are valid only for the countries of destination, the symbols of which appear on the cover and on the appliance . Using your hob Fig.1 23 546 7 8 9 Gas burners: 1. 2. Left semi-rapid burner 1.75kW 3. Right semi-rapid burner 1.75kW 1.0kW 5. Rapid burner 3.0kW Control panel: 6. Triple Ring/Rapid burner control knob 7. Left Semi-Rapid burner control knob 8. Right Semi-Rapid burner control knob 9. Auxiliary burner control knob This appliance is class 3 Gas burners: Gas flow to the burners is controlled by the control knobs (6, 7, 8 and 9 on the diagram above). There are 3 positions shown on the control panel. Turning the control knob to the positions shown below achieves the following: Closed (OFF position) Maximum position: Provides fast boiling function Minimum position: Provides simmer function The flame can be set to the desired position by turning the control knob through the adjustment range in an anti- clockwise direction. 23 1 46 7 8 9 HCG602 HCG612 / HCG622 HCG612 triple ring/wok burner 3.5kW 4. Auxiliary burner HCG622 triple ring/wok burner 3.6kW Using your hob Fig.1 23 546 7 8 9 Gas burners: 1. 2. Left semi-rapid burner 1.75kW 3. Right semi-rapid burner 1.75kW 1.0kW 5. Rapid burner 3.0kW Control panel: 6. Triple Ring/Rapid burner control knob 7. Left Semi-Rapid burner control knob 8. Right Semi-Rapid burner control knob 9. Auxiliary burner control knob This appliance is class 3 Gas burners: Gas flow to the burners is controlled by the control knobs (6, 7, 8 and 9 on the diagram above). There are 3 positions shown on the control panel. Turning the control knob to the positions shown below achieves the following: Closed (OFF position) Maximum position: Provides fast boiling function Minimum position: Provides simmer function The flame can be set to the desired position by turning the control knob through the adjustment range in an anti- clockwise direction. 23 1 46 7 8 9 HCG602 HCG612 / HCG622 HCG612 triple ring/wok burner 3.5kW 4. Auxiliary burner HCG622 triple ring/wok burner 3.6kW Igniting the Burners To ignite the burners, follow these instructions: 1. Lightly press the control knob (shown on the right) and turn the knob anti- clockwise to the maximum position. Press and hold the control down to begin the ignition process (a clicking sound will be heard). 2. Once the burner is lit, adjust the burner power to the required position. To turn the burner off, turn the knob clockwise past the maximum setting to the off position. The hob are fitted with a flame-failure device. Hold down the control knob for a few seconds after ignition to allow the safety device to detect that the burner is lit. Flame-failure devices operate by shutting off the supply of gas to the burner in the event that the flame is extinguished accidentally. Please note: • The ignition device should not be operated for more than 15 seconds. • If a burner does not ignite, or turns off accidentally, turn the control knob to the ‘off’ position, and wait for one minute before attempting to reignite the burner. • If the burner does not ignite, repeat the ignition process with the burner at the minimum position. Efficient use of your Hob The hob is equipped with burners of different sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with flat bottoms and choose an appropriate burner depending on the size of the pan. The most efficient use of the hob is shown below, where the pan and burner are correctly chosen. Ensure that the pans do not overlap the edge of the pan stand, or cover the control panel. The table below shows the sizes of pan that should be used with each burner: Fig.2 Fig.3 Burner Size Auxiliary Semi-Rapid Rapid Triple Ring Wok Minimum Pan Diameter (cm) 12 16 20 24 - Maximum Pan Diameter (cm) 14 20 24 28 36 Correct use of the optional Wok Pan Adaptor The wok pan adaptor is a special stand that is designed to be fitted over the Triple Ring burner to give support to round bottomed woks. When using a wok, always place the wok pan adaptor in position over the pan support on the Triple Ring burner as shown in Fig.5. IMPORTANT: •The wok pan adaptor (Fig.5) must be placed over the pan support on the Triple Ring burner. •Do not use the wok pan adaptor for standard flat bottomed pans. Fig.4 Fig.5 Correct use of the optional Wok Pan Adaptor The wok pan adaptor is a special stand that is designed to be fitted over the Triple ...

Download now

Please, enter two numbers from picture: