Press during play. Press during play for 1 second or more. In Stop mode, press for 1 second or more. Press again to restart play. If nothing is done for 2 minutes, the power will be automatically shut off. Display/reference or Blinks. Stops. Press again to restart play (Resume Play). The current track will be played from the beginning. (See “Resume Play”.) If nothing is done for 45 seconds, the power will be automatically shut off. The power is shut off after “POWER OFF” appears on the display. To turn on the unit, press the same button again. or or (Blank) Display/reference Reverse Forward Repeat Play and Random Play You can select Repeat Play or Random Play. In Repeat Play, you can repeat all the tracks or individual track as many times as you like. In Random Play, you can play all the tracks in random order. Selecting Repeat Play and Random Play in Stop mode In Stop mode, press the P.MODE button. Each time you press the button, the play mode changes as follows. P 1 = P = RDM = P 1 RDM = P RDM = Original display = (back to the beginning) P 1 : Repeats 1 track. P : Repeats all the tracks. RDM : Random play P 1 RDM : Repeats one track randomly selected. P RDM : Repeats all the tracks in random order. After selecting one of the above modes, press the 38 /7 button. For example, to start Random Play, press the P.MODE button until "RDM" indicator appears and then start playback. To exit Repeat Play or Random Play, stop the MD and then press the P.MODE button until the display returns to the original one. Repeat Play during Playback During Normal Play: Each time you press the P.MODE button, the play mode changes as follows. P 1 = P = Original display = (back to the beginning) Select “P 1” to repeatedly play the current track. Select “P ” to repeat all the tracks. During Random Play: Each time you press the P.MODE button, the play mode changes as follows. P 1 RDM = P RDM = Original display = (back to the beginning) Select “P 1 RDM” to repeatedly play a randomly selected track. Select “P RDM” to repeat all the tracks in random order. To exit Repeat Play, stop the MD and then press the P.MODE button until the display returns to the original one. Selecting the Operational Options of Remote Control CAUTION: Before connecting the car adaptor, remove the rechargeable battery and the alkaline battery from the unit. • Connect the car adaptor as shown below. • Connect the car audio cassette adaptor between the remote control and the cassette slot of your car audio system. • Adjust the volume level of the unit to an appropriate level. Notes: • Since the insertion direction of the car audio cassette adaptor is limited, be sure whether it can be inserted into the cassette slot of your car audio system. • Depending on the vehicle used, noise may occur. In this case, it is recommended to connect a noise filter available on the market between the remote control and car audio cassette adaptor. • If your car audio system is equipped with a LINE IN or AUX IN jack, you can connect the output of the remote control to the jack using a stereo mini plug signal cord (not supplied). In this case, you do not need the optional car audio cassette adaptor. Troubleshooting Guide Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this unit) to locate a convenient service center, or consult your dealer for instructions. Problem Cannot operate. Cannot play the MD. Tracks on MD do not play in order, starting with the first track. Cannot hear music—too noisy. TV picture is distorted. Radio reception is noisy. Power is not turned on. FAV registration is impossible. Charging indicator does not light during charging. Check this Is the MD loaded? If not loaded “NO DISC” will appear. • Is the HOLD switch released? • Is the battery low? • Is there moisture condensation on the lens? (Wait for about an hour and then try again.) • Is the Repeat Play or Random Play selected? • Is the FAV function activated? • Is the headphones plug inserted all the way? • Is the plug dirty? (Wipe away dirt on the plug.) • Is music recorded on the MD? If not, “BLANK DISC” will appear. Is the unit too near a TV or tuner? (If the TV or tuner is connected to a simple indoor antenna, connect it to an outdoor antenna.) • With both HOLD switches activated, the battery was changed during playback. (Release both HOLD switches and try to operate again.) • After FAV music registration, you have changed the battery without stopping the MD. (Turn off the power before changing the battery.) Is the charger too hat? (If so, disconnect the AC adaptor and leave the charger for a while.) Maintenance Unit: Wipe the unit and remote c...