|
manual abstract
Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. Notice for Canada This Class B digital apparatus complies with Canadian ICES-003. EN 2 Your new player What's in the box Make sure that you have received the following items: Player Earphones Quick start guide Philips GoGear audio playerQuick start guide Safety and Warranty sheet Safety and WarrantyBefore using your set: Check out details inside this booklet Note ••The images serve as reference only. Philips reserves the right to change color/design without notice. PC software for the player SOUNDDOT can work with the following PC software: • Philips Device Manager (helps you get firmware updates and recover the player) Files loaded on the player The following files are loaded on SOUNDDOT: • User manual • Frequently asked questions Overview Controls cadegfb a • Press and hold: Switch the player on or off • Press: Pause/ resume play • Press twice during play: Switch the random play on or off b / • Press: Decrease or increase the volume • Press and hold: Skip to the previous or next song EN c USB connector for power charging and data transfer d Clip e RESET • Press the hole by using the tip of a ball pen when the player does not respond to the pressing of keys f LED indicator g • 3.5 mm-headphone connector LED indicator and audio feedback With the LED indicator and/ or audio feedback, you can know the status of the player. BEEP EN 3 Get started Charge power SOUNDDOT has a built-in battery that can be charged through the USB socket of a computer. • Rotate the USB connector to connect SOUNDDOT to a PC. »»During power charging, the indicator changes its color to denote the battery level. »»When the battery is full, the green indicator lights up. Tip ••When the battery level is lower than 15%, the red indicator flashes and two beeps sound. ••Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings. Switch the player on or off • Press and hold until the green or red indicator lights up. »»Power on: The green indicator lights up. Music play starts. »»Power off: The red indicator lights up. One beep sounds. Automatic standby and shut-down The player has an automatic standby and shut- down feature that can save battery power. After five minutes in idle mode (no play, no button is pressed), the player switches off. EN 4 Play music Transfer music to the player You can transfer music from your PC media library to SOUNDDOT in the following ways: • Drag and drop music files in Windows Explorer. To drag and drop music files in Windows Explorer, 1 Connect SOUNDDOT to a PC. 2 On the PC, under My Computer or Computer, • drag and drop music files from the PC to SOUNDDOT. Play music 1 Make sure that you have switched on the player (see 'Switch the player on or off' on page 7). »»The green indicator lights up. Music play starts. »»During music play, the green indicator flashes at intervals. 2 Press to pause or resume play. Search for a song • Press and hold / to skip to the previous or next song. »»One beep sounds. Change the volume level • Press / . »»During music play, you hear the change of volume level. Switch the random play on or off 1 During music play, press twice. »»You hear two beeps. The green indicator flashes twice at intervals. »»Songs play in random. 2 To switch off the random play, press twice again. »»You hear one beep. The green indicator flashes once at intervals. »»Songs play in sequence. EN 5 Update the firmware through Philips Device Manager Install Philips Device Manager 1 Connect SOUNDDOT to a PC. 2 On the PC, select My Computer (Windows XP / Windows 2000) / Computer (Windows Vista / Windows 7 / 8). 3 Right click on the Philips GoGear SOUNDDOT icon. Select Install Philips Device Manager. • Alternatively, click the Philips GoGear SOUNDDOT icon. Double-click the installer.exe. 4 Follow the onscreen instructions to complete the installation of the software. Note ••The installation requires you to agree to the license terms. Check for firmware updates 1 Make sure that you have connected your PC to the Internet. 2 Launch Philips Device Manager. »»A dialog box is displayed. 3 Connect SOUNDDOT to your PC. »»When the device is connected, "SA4DOTXX" is displayed on the text box. »»You can find current firmware version of the device. 4 To check for firmware updates, a Close the dialog box of Philips Device Manager. b At the base of the PC screen, right click and select Check for updates. EN »»Philips SA4DOTXX Device Manager checks for updates from the Internet. Update the firmware 1 When the firmware update is available, follow the onscreen instructions to download and install the firmware. 2 Disconnect SOUNDDOT from the PC. »»SOUNDDOT restarts after the firmware is updated and is ready for use again, EN 6 Troubleshooting If SOU...
Other models in this manual:Portable Players - SA4DOT02WNS/37 (356.8 kb)
Portable Players - SA4DOT02BNS/37 (356.8 kb)
Portable Players - SA4DOT02BN/37 (356.8 kb)
Portable Players - SA4DOT02PN/37 (356.8 kb)