Votes - 2, Average rating: 3
(
)
)
|
manual abstract
• After sounding for 1 minute, the alarm will automatically stop and the alarm setting will be canceled. If the alarm stops during stop mode, then the power will automatically turn off 10 seconds after the alarm stops. If the alarm stops while an MD is playing, the playback will continue uninterrupted. Note The timer will begin counting from the moment you select “ON” in step 4. When you change the alarm setting in step 6, timer will begin counting again with the new alarm setting. Protecting your hearing (AVLS) AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears. 1 During playback, press and hold DISPLAY for 2 seconds or more. 2 Slide the jog lever repeatedly until “OPTION” appears in the display, and then press the jog lever. 3 Slide the jog lever repeatedly until “AVLS” appears in the display, and then press the jog lever. 4 Slide the jog lever repeatedly until “AVLS ON” appears in the display, and then press the jog lever to enter the selection. “AVLS ON” appears in the display. To set the AVLS function on the player During playback, slide HOLD in the direction of B, and then while pressing towards VOL –, slide HOLD in the opposite direction. To cancel the AVLS function On the remote control, select “AVLS OFF” in step 4 above and press the jog lever. On the player, during playback, slide HOLD in the direction of B, and then while pressing towards VOL +, slide HOLD in the opposite direction. To cancel the procedure Press and hold the DISPLAY button or the x button for 2 seconds or more. z Once you open the lid, the playback speed reverts back to the normal speed (0%). Note When using digital pitch control, you may hear noise or an echo in the playback. Storing the settings for individual discs (Personal Disc Memory) Settings can be memorized for a disc. Once memorized, “PERSONAL” appears in the display, the settings are recalled, and applied whenever the disc is inserted. The following settings can be stored: • Volume • Play mode • Program setting • Virtual surround/6-band equalizer • Playback speed (Digital Pitch Control) • Bookmark This procedure can be done by the remote control. 1 Press and hold DISPLAY for 2 seconds or more. 2 Slide the jog lever repeatedly until “USEFUL” appears in the display, and then press the jog lever. 3 Slide the jog lever repeatedly until “PERSONAL” appears in the display, and then press the jog lever. “Entry?” flashes in the display. 4 Press the jog lever to enter the selection. “Entry OK” appears in the display and the disc settings are stored in the player. To erase the information recorded in personal disc memory Insert the disc whose information is to be erased and verify its contents. After step 3 above, slide the jog lever repeatedly to flash “Erase?” in the display. And then press the jog lever to enter the selection. “Erase OK” appears in the display and the disc information is erased. If you try to erase the disc information of a disc that has never been stored, “No Entry!” appears in the display. Notes • Settings can be stored for up to 20 discs. Any settings stored thereafter will replace the settings for the MD with the oldest playback date. • If you use another MD recorder to edit or add tracks to a disc whose settings have been stored on the player, the disc will no longer be recognizable by the player and the stored information will become useless. Setting the alarm (Melody Timer) The alarm is convenient way to remind yourself of important times, such as when to get off the train. The alarm can be set to go off in 1 to 99 minutes. The alarm will also go off while the player is stopped. This procedure can be done by the remote control. 1 Press and hold DISPLAY for 2 seconds or more. 2 Slide the jog lever repeatedly until “USEFUL” appears in the display, and then press the jog lever. 3 Slide the jog lever repeatedly until “M–TIMER” appears in the display, and then press the jog lever. 4 Slide the jog lever repeatedly until “ON” appears in the display, and then press the jog lever. , appears. Turning off the beep sound You can set the beep so that it is not emitted when the player and remote control are operated. This procedure can be done by the remote control. 1 Press and hold DISPLAY for 2 seconds or more. 2 Slide the jog lever repeatedly until “OPTION” appears in the display, and then press the jog lever. 3 Slide the jog lever repeatedly until “BEEP” appears in the display, and then press the jog lever. 4 Slide the jog lever repeatedly until “BEEP OFF” appears in the display, and then press the jog lever to enter the selection. To cancel the procedure Press and hold the DISPLAY button or the x button for 2 seconds or more. To cancel the setting Select “BEEP ON” in step 4 above. Turning on/off the backlight in the display of the remote control You can set the backlight in the display on the remote control. This procedure can be done by the remote control. 1 Press and hold DISPLAY for 2 seconds or more. 2 Slide th...