Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
• Do not get the leads under a screw, or caught in moving parts (e.g. seat railing). • Before making connections, turn the car ignition off to avoid short circuits. • Connect the yellow and red power input leads only after all other leads have been connected. • Run all ground leads to a common ground point. • Be sure to in su late any loose un con nect ed leads with electrical tape for safety. • The use of optical instruments with this product will increase eye hazard. Notes on the power supply lead (yellow) • When connecting this unit in combination with other stereo components, the connected car circuit’s rating must be higher than the sum of each component’s fuse. • When no car circuits are rated high enough, connect the unit directly to the battery. Parts Iist (.) • The numbers in the list are keyed to those in the instructions. • The bracket . and the protection collar . are attached to the unit before shipping. Before mounting the unit, use the release keys . to remove the bracket . and the protection collar . from the unit. For details, see “Removing the protection collar and the bracket (.)” on the reverse side of the sheet. • Keep the release keys . for future use as they are also necessary if you remove the unit from your car. Caution Handle the bracket . carefully to avoid injuring your fi ngers. Note Before installing, make sure that the catches on both sides of the bracket . are bent inwards 2 mm (3/32 in). If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. Connection example (.) Notes (.-A) • Be sure to connect the ground lead before connecting the amplifi er. • The alarm will only sound if the built-in amplifi er is used. Tip (.-B- ) For connecting two or more CD/MD changers, the source selector XA-C30 (optional) is necessary. Installation/Connections Installation/Connexions Instalacion/Conexiones FM/AM Compact Disc Player Connection diagram (.) . To a metal surface of the car First connect the black ground lead, then connect the orange/white striped, yellow, and red power input leads. . To the power antenna control lead or power supply lead of antenna booster amplifi er Notes • It is not necessary to connect this lead if there is no power antenna or antenna booster, or with a manually-operated telescopic antenna. • When your car has a built-in FM/AM antenna in the rear/ side glass, see “Notes on the control and power supply leads.” . To AMP REMOTE IN of an optional power amplifi er This connection is only for amplifi ers. Connecting any other system may damage the unit. . To the interface cable of a car telephone . To a car’s illumination signal Be sure to connect the black ground lead to a metal surface of the car fi rst. . To the +12 V power terminal which is energized in the accessory position of the ignition key switch Notes • If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. Be sure to connect the black groun...
Other models in this manual:Portable Players - CDX M7815X (357.18 kb)