Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Basic Operations Precautions Troubleshooting Basic Operations Precautions Troubleshooting .. have a tactile dot. Playing a CD 1 Pull PULL OPEN . to open the CD compartment lid and place a disc on the pivot in the center of the tray. 2 Close the CD compartment lid. 3 Set the function selector . to CD. OPR/BATT indicator . turns on and total track number appears in the display after “– –” blinks. 4 Press ... “01” appears in the display to indicate that track 1 of the CD is playing. The unit plays all the tracks once. To Press Pause playback .. Stop playback .. Go to the next .. track Go back to the .. previous track Locate a point . (forward) or . (backward) while listening to . while playing and hold it until the sound you find the point. Remove the CD PULL OPEN . To remove the CD Remove the CD as illustrated below. Listening to the radio 1 Set the function selector . to RADIO. OPR/BATT indicator . turns on. 2 Select a desired band using .. 3 Tune in to the station using TUNE .. If FM stereo reception is too weak, the reception switches to monaural. Connecting optional components You can enjoy the sound from an optional component such as a portable digital music player through the speakers of this unit. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. 1 Connect the AUDIO IN jack .on the back of the unit to the line output jack of a portable digital music player or other component using an audio connecting cable (not supplied). 2 Turn the unit and the connected component on. 3 Set the function selector . to AUDIO IN and start playback of the connected component. The OPR/BATT indicator . turns on and the sound from the connected component is output from the speakers of this unit. To connect the unit to a TV or VCR, use an extension cable (not supplied) with a stereo-mini jack on one end and two phono plugs on the other end. Discs that this unit CAN play • Audio CD • CD-R/CD-RW (CD-DA*) *CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs. Discs that this unit CANNOT play • CD-R/CD-RW other than those recorded in music CD format • CD-R/CD-RW of poor recording quality, CD-R/CDRW that has scratches or are dirty, or CD-R/CD-RW recorded with an incompatible recording device • CD-R/CD-RW which is finalized incorrectly Notes on discs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking errors. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. • Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight, as there can be a considerable rise in temperature inside the car. • Do not stick paper or stickers on the CD, nor scratch the surface of the CD. • After playing, store the CD in its case. On safety • As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. • Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further. • Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this player. Attempting to do so may damage the player. Do not use such discs. On power sources • For AC operation, use the supplied AC power cord; do not use any other type. • Unplug the player from the wall outlet when it is not to be used for an extended period of time. • When the batteries are not to be used, remove them to avoid damage that can be caused by battery leakage or corrosion. On placement • Do not leave the player in a location near heat sources, in a place subject to direct sunlight, excessive dust, or mechanical shock, or in a car subject to the direc...
Other models in this manual:Portable Players - ZS-E5 (413.41 kb)