Votes - 4, Average rating: 3.3
(
)
)
|
manual abstract
Press =once. Turn the control to = on the remote control. (Three short beeps) Press +•( once. Turn the control to (•+ on the remote control. (Two short beeps) Keep pressing =. Keep the control turned to = on the remote control. Keep pressing +•(. Keep the control turned to (•+ on the remote control. Press p and slide OPEN to open the lid.2) To Pause Find the beginning of the current track Find the beginning of the next track Go backwards while playing1) Go forward while playing1) Remove the MD Playback Approx. 8.5 hours Approx. 10 hours Approx. 21 hours When to replace or charge the batteries You can check the battery condition with the battery indication which is displayed while using the player. . Battery power decreasing v b Weak batteries. Replace/recharge the batteries v n The batteries have gone out. “LoBATT” flashes in the display of the remote control, and the power goes off. Battery life* Batteries Ni-MH rechargeable battery (NH-14WM) One LR6 (size AA) alkaline battery One LR6 (size AA) alkaline battery and a Ni-MH rechargeable battery (NH-14WM) * The battery life may be shorter due to operating conditions and the temperature of the location. Using on house current H Before using the player, remove the rechargeable battery if it is installed. 1 Attach the supplied battery case to the player. 2 Connect the AC-E15L AC power adaptor (not supplied) to the DC IN 1.5V jack of the battery case. 3 Connect the AC power adaptor to a wall outlet. Note The battery indication o is displayed while using the AC power adaptor. zPower sources You can use the player on a dry battery, house current, or a Ni-MH rechargeable battery. Using on a dry battery G 1 Insert one size LR6 (size AA) alkaline battery (not supplied) into the supplied battery case, and close the lid. 2 Attach the battery case to the player. If playback does not start Make sure the player is not locked. See “To lock the controls.” Display window while playing back Tips •The OPERATE lamp will light up on the main unit during playback. It will go off when p is pressed. •The display on the remote control will disappear after a while after you have pressed p. Note Do not slide OPEN during playback. If you do, the lid opens and playback will stop. When using optional headphones Use the headphones that have stereominiplug. You cannot use other types of headphones (microplug). 1) If you press = or +•( during pause, the player will resume playback. If you keep pressing = or +•( during pause (keep the control turned to = or (•+ on the remote control), you can fast forward/rewind without listening to the playback sound. 2) Once you open the lid, the point to start play will change to the beginning of the first track. 3) Appears only with MDs that have been electronically labeled. Operating instructions Portable MiniDisc Player MZ-E80 Sony Corporation © 1999 Printed in Japan 3-867-258-21(1) TM WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Caution The use of optical instruments with this product will increase eye hazard. Information IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT. This mark is valid for Russia only. ”MD WALKMAN” is a trademark of Sony Corporation. Welcome! Welcome to the world of the MiniDisc! Here are some of the capabilities and features you'll discover with the new MiniDisc Player. • Small body almost the size of a MiniDisc jacket – Ideal weight and size; fits in your shirt pocket. • Shock-resistant memory offsets up to 40 seconds of optical read errors. • Low power-consumption design enables long playback with a single “chewing-gum type” rechargeable battery. • Shuttle dial remote control with backlit LCD – Keep the main unit in your pocket and operate the MiniDisc player through the shuttle dial on the remote control; The LCD displays track information, playback mode as well as battery condition. Playing an MD right away! A Before using the supplied rechargeable battery for the first time, charge it. Other choices are a dry battery and house current (see “Power sources”). The player automatically switches to play the stereo or monaural sound according to the recorded sound. Charge the rechargeable battery. When the rechargeable battery is charged about 90%, the charger lamp goes off. Full-charging takes about another hour (a total of about 2.5 hours). Insert the rechargeable battery. Insert an MD. lamp NH-14WM (supplied) 2 Insert an MD with the label facing up and press the lid down to close. 1 Slide OPEN and open the lid. 3 2 Insert the battery with correct polarity. 1 Slide open the battery compartment as shown in the illustration. zVarious ways of playback Playing tracks repeatedly B You can play tracks repeatedly in three ways –all repeat, single repeat, and shuffle...