Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
4 Press the MENU button. The display returns to the normal screen. To change the setting to “ON” Select “ON” in step 3. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. Adjusting the settings of your Network Walkman 23 Adjusting the current time setting (DATE-TIME) You can set and display the current time. You can also adjust the time setting of your Network Walkman to a computer’s built-in clock by connecting your Network Walkman to the computer (page 23). Gro pMode ode Shuttle switch Press (Confirm) Nx button MENU button to (+/>) to (./–) 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select “DATE-TIME” and press the Nx button to confirm. The “year” digit blinks. 2004y1m1d 3 Rotate the Shuttle switch to adjust the “year” setting and press the Nx button to confirm. The “month” digit blinks. 2004y1m1d 4 As you did in step 3, adjust the settings for “month” and “date.” After rotating the Shuttle switch to adjust the “date” setting and pressing the Nx button to confirm, the display switches to the time setting screen. 0:00 5 Rotate the Shuttle switch to adjust the “hour” setting and press the Nx button to confirm. The “minute” digit blinks. 0:00 6 As you did in step 5, adjust the settings for “minute.” After rotating the Shuttle switch to adjust the “minute” setting and pressing the Nx button to confirm, the display switches to the time setting screen. DATE-TIME 7 Press the MENU button. The display returns to the normal screen. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. To display the current time Press the MENU button and hold it. You can display the current time while pressing the button. Notes • If the unit is not used for a long time, your settings of the date and time may be reset. • If the current time is not set, the display for the date and time will be “-- --.” • If PC CLK is set to “ON” (page 23), the time setting of your Network Walkman is automatically adjusted to a computer’s built-in clock when your Network Walkman is connected to the computer. • Depending on the shipping area, the time display format of the unit is set to a 12-hour display or a 24-hour display. You cannot switch between a 12-hour display and a 24-hour display in the unit. A 24-hour display is shown in this manual. Limiting the volume (AVLS) You can set AVLS (Automatic Volume Limiter System) to limit the maximum volume to prevent auditory disturbance or distraction. With AVLS, you can listen to music at a comfortable volume level. Adjusting the settings of your Network WalkmanGro pM de ode Shuttle switch Press (Confirm) Nx button MENU button to (+/>) to (./–) 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select “AVLS” and press the Nx button to confirm. “OFF” blinks. AVLS:OFF 3 Rotate the Shuttle switch to select “ON” and press the Nx button to confirm. The (AVLS) indication is displayed. The volume is kept at a moderate level. 4 Press the MENU button. continued 25 Limiting the volume (AVLS) Setting the volume To change the setting to “OFF” Select “OFF” in step 3. To cancel the menu mode Select [RETURN] in the menu screen, or press the MENU button. using the preset volume function There are two modes to adjust the volume level. Manual mode: Press the VOLUME +/– button to adjust the volume level in the range of 0 to 31. Preset mode: Press the VOLUME +/– button to set the volume level to any of three preset levels: LO, MID, or HI. Gro pM de ode Shuttle switch Press (Confirm) Nx button MENU button to (+/>) to (./–) VOLUME +/– button Setting a volume level of the preset mode 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select “VOL: MAN.” VOL :MAN 3 Press the Nx button to confirm. “MAN” blinks. 4 Rotate the Shuttle switch to select “SET >.” VOL:SET> 5 Press the Nx button to confirm. “VOL LO xx”* blinks. * “xx” stands for numeric values of the volume level. Note If AVLS (page 25) is set, the actual volume may be lower than the settings. Switching to the manual mode 1 Press the MENU button. The menu screen is displayed. 2 Rotate the Shuttle switch to select “VOL: SET.” VOLLOxx 6 Set volume levels of three preset levels: LO, MID, or HI. 1 Press the VOLUME +/– button to set the volume level of the LO preset. 2 Rotate the Shuttle switch to select “VOL MID xx,” and then press the VOLUME +/– button to set the volume level of the MID preset. 3 Rotate the Shuttle switch to select “VOL HI xx,” and then press the VOLUME +/– button to set the volume level of the HI preset. 7 Press the Nx button to confirm. 8 Press the MENU button. The display returns to the normal screen. With these settings, you can adjust the volume level to any of three preset levels: LO, MID, or HI. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. VOL :SET> 3 Press the Nx button to confirm. “SET >” blinks. ...
Other models in this manual:Portable Players - NW-E53 (538.81 kb)