Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
While in Pause mode, press the button again to resume playback. I Adjusting the Volume Press the joystick up or down to adjust the volume from 00 to 30. . N NNNNo oooot tttte eeee -If the file name is not displayed correctly, move to [Settings] . [Display] . [Language] and then change the language setting. When the language setting changes, the language in the menu screen changes accordingly. -WMA files can only be played as music files with a compression rate of 48Kbps-192Kbps. -The power off time can be set in the menu. In Hold mode, all buttons are disabled. Slide the switch in the direction of the arrow. . When the button is pressed, the “ HOLD!” message will appear on the display. ENG Recording Voice . To move to other modes from the Voice mode, refer to “Changing Mode”. 1 Press and hold the REC button to start voice recording. 2 Press the REC button again to stop the recording and save the voice file. . N NNNNo oooot tttte eeee -The files are recorded in the order of V001,V002......, and saved as WAV file in the VOICE folder after recording. -If the Memory is full, Voice Recording is stopped automatically. Searching for Music/Voice FilesMP3 Encoding . To move to other modes from LINE_ENC mode, refer to “Changing Mode”. 1 Connect the Audio Output port on the external audio source (or the Line Out port) to the ENC port on the device with the Line cable. 2 Press and hold the REC button to start MP3 encoding. If the button is pressed, encoding is paused and if the button is pressed again, the encoding resumes. 3 If the REC button is pressed during encoding, the encoding stops and an encoding file is created. The files are encoded in the order of L001, L002.... and saved as MP3 file in LINE_ENC folder after encoding. . . N NNNNo oooot tttte eeee -Bit Rates can be set within the range of 32Kbps~128Kbps. -Volume can be adjusted while monitoring the Encoding. N NNNNo oooot tttti iiiic cccce eeee -Do not disconnect the Line cable during Encoding. -If the battery is not sufficiently charged, the player will not completely encode the file. -Adjust the volume of the external audio source to a suitable level and encode it. If the volume level is too high, the sound quality may be poor. ¤ ¤¤ To search for specific parts during play Press and hold the joystick left or right during playback to search for the part you want to listen to. Release the joystick to resume play normally. ¤ ¤¤ To change tracks during play Press the joystick to the Press the joystick to the to move to and play the previous track. Press the joystick to the position briefly during playback to play the next track. position briefly within 5 seconds after playback starts, position briefly after five seconds to play the current track from the beginning. ¤ ¤¤ To change tracks when stopped Press the joystick left or right in stop mode to move to the previous/next track. . N NNNNo oooot tttte eeee -VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file. -In the case of a VBR file, you cannot move to and play the previous track even if you press the joystick to the position within 5 seconds after playback st...
Other models in this manual:Portable Players - YP-MT6V (2.99 mb)
Portable Players - YP-MT6VB (2.99 mb)
Portable Players - YP-MT6VG (2.99 mb)
Portable Players - YP-MT6VL (2.99 mb)